Merge

hotspot/src/cpu/x86/vm/assembler_x86.cpp

@@ -1575,6 +1575,35 @@ void Assembler::movdqa(Address dst, XMMRegister src) {
   emit_operand(src, dst);
 }
 
+void Assembler::movdqu(XMMRegister dst, Address src) {
+  NOT_LP64(assert(VM_Version::supports_sse2(), ""));
+  InstructionMark im(this);
+  emit_byte(0xF3);
+  prefix(src, dst);
+  emit_byte(0x0F);
+  emit_byte(0x6F);
+  emit_operand(dst, src);
+}
+
+void Assembler::movdqu(XMMRegister dst, XMMRegister src) {
+  NOT_LP64(assert(VM_Version::supports_sse2(), ""));
+  emit_byte(0xF3);
+  int encode = prefixq_and_encode(dst->encoding(), src->encoding());
+  emit_byte(0x0F);
+  emit_byte(0x6F);
+  emit_byte(0xC0 | encode);
+}
+
+void Assembler::movdqu(Address dst, XMMRegister src) {
+  NOT_LP64(assert(VM_Version::supports_sse2(), ""));
+  InstructionMark im(this);
+  emit_byte(0xF3);
+  prefix(dst, src);
+  emit_byte(0x0F);
+  emit_byte(0x7F);
+  emit_operand(src, dst);
+}
+
 // Uses zero extension on 64bit
 
 void Assembler::movl(Register dst, int32_t imm32) {

hotspot/src/cpu/x86/vm/assembler_x86.hpp

@@ -1055,6 +1055,11 @@ private:
   void movdqa(XMMRegister dst, Address src);
   void movdqa(XMMRegister dst, XMMRegister src);
 
+  // Move Unaligned Double Quadword
+  void movdqu(Address     dst, XMMRegister src);
+  void movdqu(XMMRegister dst, Address src);
+  void movdqu(XMMRegister dst, XMMRegister src);
+
   void movl(Register dst, int32_t imm32);
   void movl(Address dst, int32_t imm32);
   void movl(Register dst, Register src);

hotspot/src/cpu/x86/vm/stubGenerator_x86_32.cpp

@@ -791,6 +791,69 @@ class StubGenerator: public StubCodeGenerator {
     }
   }
 
+
+  // Copy 64 bytes chunks
+  //
+  // Inputs:
+  //   from        - source array address
+  //   to_from     - destination array address - from
+  //   qword_count - 8-bytes element count, negative
+  //
+  void xmm_copy_forward(Register from, Register to_from, Register qword_count) {
+    assert( UseSSE >= 2, "supported cpu only" );
+    Label L_copy_64_bytes_loop, L_copy_64_bytes, L_copy_8_bytes, L_exit;
+    // Copy 64-byte chunks
+    __ jmpb(L_copy_64_bytes);
+    __ align(16);
+  __ BIND(L_copy_64_bytes_loop);
+
+    if(UseUnalignedLoadStores) {
+      __ movdqu(xmm0, Address(from, 0));
+      __ movdqu(Address(from, to_from, Address::times_1, 0), xmm0);
+      __ movdqu(xmm1, Address(from, 16));
+      __ movdqu(Address(from, to_from, Address::times_1, 16), xmm1);
+      __ movdqu(xmm2, Address(from, 32));
+      __ movdqu(Address(from, to_from, Address::times_1, 32), xmm2);
+      __ movdqu(xmm3, Address(from, 48));
+      __ movdqu(Address(from, to_from, Address::times_1, 48), xmm3);
+
+    } else {
+      __ movq(xmm0, Address(from, 0));
+      __ movq(Address(from, to_from, Address::times_1, 0), xmm0);
+      __ movq(xmm1, Address(from, 8));
+      __ movq(Address(from, to_from, Address::times_1, 8), xmm1);
+      __ movq(xmm2, Address(from, 16));
+      __ movq(Address(from, to_from, Address::times_1, 16), xmm2);
+      __ movq(xmm3, Address(from, 24));
+      __ movq(Address(from, to_from, Address::times_1, 24), xmm3);
+      __ movq(xmm4, Address(from, 32));
+      __ movq(Address(from, to_from, Address::times_1, 32), xmm4);
+      __ movq(xmm5, Address(from, 40));
+      __ movq(Address(from, to_from, Address::times_1, 40), xmm5);
+      __ movq(xmm6, Address(from, 48));
+      __ movq(Address(from, to_from, Address::times_1, 48), xmm6);
+      __ movq(xmm7, Address(from, 56));
+      __ movq(Address(from, to_from, Address::times_1, 56), xmm7);
+    }
+
+    __ addl(from, 64);
+  __ BIND(L_copy_64_bytes);
+    __ subl(qword_count, 8);
+    __ jcc(Assembler::greaterEqual, L_copy_64_bytes_loop);
+    __ addl(qword_count, 8);
+    __ jccb(Assembler::zero, L_exit);
+    //
+    // length is too short, just copy qwords
+    //
+  __ BIND(L_copy_8_bytes);
+    __ movq(xmm0, Address(from, 0));
+    __ movq(Address(from, to_from, Address::times_1), xmm0);
+    __ addl(from, 8);
+    __ decrement(qword_count);
+    __ jcc(Assembler::greater, L_copy_8_bytes);
+  __ BIND(L_exit);
+  }
+
   // Copy 64 bytes chunks
   //
   // Inputs:
@@ -799,6 +862,7 @@ class StubGenerator: public StubCodeGenerator {
   //   qword_count - 8-bytes element count, negative
   //
   void mmx_copy_forward(Register from, Register to_from, Register qword_count) {
+    assert( VM_Version::supports_mmx(), "supported cpu only" );
     Label L_copy_64_bytes_loop, L_copy_64_bytes, L_copy_8_bytes, L_exit;
     // Copy 64-byte chunks
     __ jmpb(L_copy_64_bytes);
@@ -876,7 +940,7 @@ class StubGenerator: public StubCodeGenerator {
     __ subptr(to, from); // to --> to_from
     __ cmpl(count, 2<<shift); // Short arrays (< 8 bytes) copy by element
     __ jcc(Assembler::below, L_copy_4_bytes); // use unsigned cmp
-    if (!aligned && (t == T_BYTE || t == T_SHORT)) {
+    if (!UseUnalignedLoadStores && !aligned && (t == T_BYTE || t == T_SHORT)) {
       // align source address at 4 bytes address boundary
       if (t == T_BYTE) {
         // One byte misalignment happens only for byte arrays
@@ -906,20 +970,26 @@ class StubGenerator: public StubCodeGenerator {
       __ mov(count, rax);      // restore 'count'
       __ jmpb(L_copy_2_bytes); // all dwords were copied
     } else {
-      // align to 8 bytes, we know we are 4 byte aligned to start
+      if (!UseUnalignedLoadStores) {
-      __ testptr(from, 4);
+        // align to 8 bytes, we know we are 4 byte aligned to start
-      __ jccb(Assembler::zero, L_copy_64_bytes);
+        __ testptr(from, 4);
-      __ movl(rax, Address(from, 0));
+        __ jccb(Assembler::zero, L_copy_64_bytes);
-      __ movl(Address(from, to_from, Address::times_1, 0), rax);
+        __ movl(rax, Address(from, 0));
-      __ addptr(from, 4);
+        __ movl(Address(from, to_from, Address::times_1, 0), rax);
-      __ subl(count, 1<<shift);
+        __ addptr(from, 4);
+        __ subl(count, 1<<shift);
+      }
     __ BIND(L_copy_64_bytes);
       __ mov(rax, count);
       __ shrl(rax, shift+1);  // 8 bytes chunk count
       //
       // Copy 8-byte chunks through MMX registers, 8 per iteration of the loop
       //
-      mmx_copy_forward(from, to_from, rax);
+      if (UseXMMForArrayCopy) {
+        xmm_copy_forward(from, to_from, rax);
+      } else {
+        mmx_copy_forward(from, to_from, rax);
+      }
     }
     // copy tailing dword
   __ BIND(L_copy_4_bytes);
@@ -1069,13 +1139,20 @@ class StubGenerator: public StubCodeGenerator {
       __ align(16);
       // Move 8 bytes
     __ BIND(L_copy_8_bytes_loop);
-      __ movq(mmx0, Address(from, count, sf, 0));
+      if (UseXMMForArrayCopy) {
-      __ movq(Address(to, count, sf, 0), mmx0);
+        __ movq(xmm0, Address(from, count, sf, 0));
+        __ movq(Address(to, count, sf, 0), xmm0);
+      } else {
+        __ movq(mmx0, Address(from, count, sf, 0));
+        __ movq(Address(to, count, sf, 0), mmx0);
+      }
     __ BIND(L_copy_8_bytes);
       __ subl(count, 2<<shift);
       __ jcc(Assembler::greaterEqual, L_copy_8_bytes_loop);
       __ addl(count, 2<<shift);
-      __ emms();
+      if (!UseXMMForArrayCopy) {
+        __ emms();
+      }
     }
   __ BIND(L_copy_4_bytes);
     // copy prefix qword
@@ -1143,7 +1220,11 @@ class StubGenerator: public StubCodeGenerator {
 
     __ subptr(to, from); // to --> to_from
     if (VM_Version::supports_mmx()) {
-      mmx_copy_forward(from, to_from, count);
+      if (UseXMMForArrayCopy) {
+        xmm_copy_forward(from, to_from, count);
+      } else {
+        mmx_copy_forward(from, to_from, count);
+      }
     } else {
       __ jmpb(L_copy_8_bytes);
       __ align(16);
@@ -1196,8 +1277,13 @@ class StubGenerator: public StubCodeGenerator {
     __ align(16);
   __ BIND(L_copy_8_bytes_loop);
     if (VM_Version::supports_mmx()) {
-      __ movq(mmx0, Address(from, count, Address::times_8));
+      if (UseXMMForArrayCopy) {
-      __ movq(Address(to, count, Address::times_8), mmx0);
+        __ movq(xmm0, Address(from, count, Address::times_8));
+        __ movq(Address(to, count, Address::times_8), xmm0);
+      } else {
+        __ movq(mmx0, Address(from, count, Address::times_8));
+        __ movq(Address(to, count, Address::times_8), mmx0);
+      }
     } else {
       __ fild_d(Address(from, count, Address::times_8));
       __ fistp_d(Address(to, count, Address::times_8));
@@ -1206,7 +1292,7 @@ class StubGenerator: public StubCodeGenerator {
     __ decrement(count);
     __ jcc(Assembler::greaterEqual, L_copy_8_bytes_loop);
 
-    if (VM_Version::supports_mmx()) {
+    if (VM_Version::supports_mmx() && !UseXMMForArrayCopy) {
       __ emms();
     }
     inc_copy_counter_np(T_LONG);

hotspot/src/cpu/x86/vm/stubGenerator_x86_64.cpp

@@ -1251,6 +1251,7 @@ class StubGenerator: public StubCodeGenerator {
     }
   }
 
+
   // Copy big chunks forward
   //
   // Inputs:
@@ -1268,14 +1269,22 @@ class StubGenerator: public StubCodeGenerator {
     Label L_loop;
     __ align(16);
   __ BIND(L_loop);
-    __ movq(to, Address(end_from, qword_count, Address::times_8, -24));
+    if(UseUnalignedLoadStores) {
-    __ movq(Address(end_to, qword_count, Address::times_8, -24), to);
+      __ movdqu(xmm0, Address(end_from, qword_count, Address::times_8, -24));
-    __ movq(to, Address(end_from, qword_count, Address::times_8, -16));
+      __ movdqu(Address(end_to, qword_count, Address::times_8, -24), xmm0);
-    __ movq(Address(end_to, qword_count, Address::times_8, -16), to);
+      __ movdqu(xmm1, Address(end_from, qword_count, Address::times_8, - 8));
-    __ movq(to, Address(end_from, qword_count, Address::times_8, - 8));
+      __ movdqu(Address(end_to, qword_count, Address::times_8, - 8), xmm1);
-    __ movq(Address(end_to, qword_count, Address::times_8, - 8), to);
+
-    __ movq(to, Address(end_from, qword_count, Address::times_8, - 0));
+    } else {
-    __ movq(Address(end_to, qword_count, Address::times_8, - 0), to);
+      __ movq(to, Address(end_from, qword_count, Address::times_8, -24));
+      __ movq(Address(end_to, qword_count, Address::times_8, -24), to);
+      __ movq(to, Address(end_from, qword_count, Address::times_8, -16));
+      __ movq(Address(end_to, qword_count, Address::times_8, -16), to);
+      __ movq(to, Address(end_from, qword_count, Address::times_8, - 8));
+      __ movq(Address(end_to, qword_count, Address::times_8, - 8), to);
+      __ movq(to, Address(end_from, qword_count, Address::times_8, - 0));
+      __ movq(Address(end_to, qword_count, Address::times_8, - 0), to);
+    }
   __ BIND(L_copy_32_bytes);
     __ addptr(qword_count, 4);
     __ jcc(Assembler::lessEqual, L_loop);
@@ -1301,14 +1310,22 @@ class StubGenerator: public StubCodeGenerator {
     Label L_loop;
     __ align(16);
   __ BIND(L_loop);
-    __ movq(to, Address(from, qword_count, Address::times_8, 24));
+    if(UseUnalignedLoadStores) {
-    __ movq(Address(dest, qword_count, Address::times_8, 24), to);
+      __ movdqu(xmm0, Address(from, qword_count, Address::times_8, 16));
-    __ movq(to, Address(from, qword_count, Address::times_8, 16));
+      __ movdqu(Address(dest, qword_count, Address::times_8, 16), xmm0);
-    __ movq(Address(dest, qword_count, Address::times_8, 16), to);
+      __ movdqu(xmm1, Address(from, qword_count, Address::times_8,  0));
-    __ movq(to, Address(from, qword_count, Address::times_8,  8));
+      __ movdqu(Address(dest, qword_count, Address::times_8,  0), xmm1);
-    __ movq(Address(dest, qword_count, Address::times_8,  8), to);
+
-    __ movq(to, Address(from, qword_count, Address::times_8,  0));
+    } else {
-    __ movq(Address(dest, qword_count, Address::times_8,  0), to);
+      __ movq(to, Address(from, qword_count, Address::times_8, 24));
+      __ movq(Address(dest, qword_count, Address::times_8, 24), to);
+      __ movq(to, Address(from, qword_count, Address::times_8, 16));
+      __ movq(Address(dest, qword_count, Address::times_8, 16), to);
+      __ movq(to, Address(from, qword_count, Address::times_8,  8));
+      __ movq(Address(dest, qword_count, Address::times_8,  8), to);
+      __ movq(to, Address(from, qword_count, Address::times_8,  0));
+      __ movq(Address(dest, qword_count, Address::times_8,  0), to);
+    }
   __ BIND(L_copy_32_bytes);
     __ subptr(qword_count, 4);
     __ jcc(Assembler::greaterEqual, L_loop);

hotspot/src/cpu/x86/vm/vm_version_x86_32.cpp

@@ -242,9 +242,11 @@ void VM_Version::get_processor_features() {
   _supports_cx8 = supports_cmpxchg8();
   // if the OS doesn't support SSE, we can't use this feature even if the HW does
   if( !os::supports_sse())
-    _cpuFeatures &= ~(CPU_SSE|CPU_SSE2|CPU_SSE3|CPU_SSSE3|CPU_SSE4|CPU_SSE4A);
+    _cpuFeatures &= ~(CPU_SSE|CPU_SSE2|CPU_SSE3|CPU_SSSE3|CPU_SSE4A|CPU_SSE4_1|CPU_SSE4_2);
-  if (UseSSE < 4)
+  if (UseSSE < 4) {
-    _cpuFeatures &= ~CPU_SSE4;
+    _cpuFeatures &= ~CPU_SSE4_1;
+    _cpuFeatures &= ~CPU_SSE4_2;
+  }
   if (UseSSE < 3) {
     _cpuFeatures &= ~CPU_SSE3;
     _cpuFeatures &= ~CPU_SSSE3;
@@ -261,7 +263,7 @@ void VM_Version::get_processor_features() {
   }
 
   char buf[256];
-  jio_snprintf(buf, sizeof(buf), "(%u cores per cpu, %u threads per core) family %d model %d stepping %d%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
+  jio_snprintf(buf, sizeof(buf), "(%u cores per cpu, %u threads per core) family %d model %d stepping %d%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
                cores_per_cpu(), threads_per_core(),
                cpu_family(), _model, _stepping,
                (supports_cmov() ? ", cmov" : ""),
@@ -272,7 +274,8 @@ void VM_Version::get_processor_features() {
                (supports_sse2() ? ", sse2" : ""),
                (supports_sse3() ? ", sse3" : ""),
                (supports_ssse3()? ", ssse3": ""),
-               (supports_sse4() ? ", sse4" : ""),
+               (supports_sse4_1() ? ", sse4.1" : ""),
+               (supports_sse4_2() ? ", sse4.2" : ""),
                (supports_mmx_ext() ? ", mmxext" : ""),
                (supports_3dnow()   ? ", 3dnow"  : ""),
                (supports_3dnow2()  ? ", 3dnowext" : ""),
@@ -285,7 +288,7 @@ void VM_Version::get_processor_features() {
   // older Pentiums which do not support it.
   if( UseSSE > 4 ) UseSSE=4;
   if( UseSSE < 0 ) UseSSE=0;
-  if( !supports_sse4() ) // Drop to 3 if no SSE4 support
+  if( !supports_sse4_1() ) // Drop to 3 if no SSE4 support
     UseSSE = MIN2((intx)3,UseSSE);
   if( !supports_sse3() ) // Drop to 2 if no SSE3 support
     UseSSE = MIN2((intx)2,UseSSE);
@@ -375,6 +378,14 @@ void VM_Version::get_processor_features() {
         MaxLoopPad = 11;
       }
 #endif // COMPILER2
+      if( FLAG_IS_DEFAULT(UseXMMForArrayCopy) ) {
+        UseXMMForArrayCopy = true; // use SSE2 movq on new Intel cpus
+      }
+      if( supports_sse4_2() && supports_ht() ) { // Newest Intel cpus
+        if( FLAG_IS_DEFAULT(UseUnalignedLoadStores) && UseXMMForArrayCopy ) {
+          UseUnalignedLoadStores = true; // use movdqu on newest Intel cpus
+        }
+      }
     }
   }
 
@@ -413,7 +424,7 @@ void VM_Version::get_processor_features() {
 
 #ifndef PRODUCT
   if (PrintMiscellaneous && Verbose) {
-    tty->print_cr("Logical CPUs per package: %u",
+    tty->print_cr("Logical CPUs per core: %u",
                   logical_processors_per_package());
     tty->print_cr("UseSSE=%d",UseSSE);
     tty->print("Allocation: ");

hotspot/src/cpu/x86/vm/vm_version_x86_32.hpp

@@ -68,9 +68,9 @@ public:
                cmpxchg16: 1,
                         : 4,
                dca      : 1,
-                        : 4,
+               sse4_1   : 1,
-               popcnt   : 1,
+               sse4_2   : 1,
-                        : 8;
+                        : 11;
     } bits;
   };
 
@@ -177,8 +177,9 @@ protected:
      CPU_SSE2 = (1 << 7),
      CPU_SSE3 = (1 << 8), // sse3  comes from cpuid 1 (ECX)
      CPU_SSSE3= (1 << 9),
-     CPU_SSE4 = (1 <<10),
+     CPU_SSE4A= (1 <<10),
-     CPU_SSE4A= (1 <<11)
+     CPU_SSE4_1 = (1 << 11),
+     CPU_SSE4_2 = (1 << 12)
    } cpuFeatureFlags;
 
   // cpuid information block.  All info derived from executing cpuid with
@@ -240,22 +241,14 @@ protected:
   static CpuidInfo _cpuid_info;
 
   // Extractors and predicates
-  static bool is_extended_cpu_family() {
-    const uint32_t Extended_Cpu_Family = 0xf;
-    return _cpuid_info.std_cpuid1_rax.bits.family == Extended_Cpu_Family;
-  }
   static uint32_t extended_cpu_family() {
     uint32_t result = _cpuid_info.std_cpuid1_rax.bits.family;
-    if (is_extended_cpu_family()) {
+    result += _cpuid_info.std_cpuid1_rax.bits.ext_family;
-      result += _cpuid_info.std_cpuid1_rax.bits.ext_family;
-    }
     return result;
   }
   static uint32_t extended_cpu_model() {
     uint32_t result = _cpuid_info.std_cpuid1_rax.bits.model;
-    if (is_extended_cpu_family()) {
+    result |= _cpuid_info.std_cpuid1_rax.bits.ext_model << 4;
-      result |= _cpuid_info.std_cpuid1_rax.bits.ext_model << 4;
-    }
     return result;
   }
   static uint32_t cpu_stepping() {
@@ -293,6 +286,10 @@ protected:
       result |= CPU_SSSE3;
     if (is_amd() && _cpuid_info.ext_cpuid1_rcx.bits.sse4a != 0)
       result |= CPU_SSE4A;
+    if (_cpuid_info.std_cpuid1_rcx.bits.sse4_1 != 0)
+      result |= CPU_SSE4_1;
+    if (_cpuid_info.std_cpuid1_rcx.bits.sse4_2 != 0)
+      result |= CPU_SSE4_2;
     return result;
   }
 
@@ -380,7 +377,8 @@ public:
   static bool supports_sse2()     { return (_cpuFeatures & CPU_SSE2) != 0; }
   static bool supports_sse3()     { return (_cpuFeatures & CPU_SSE3) != 0; }
   static bool supports_ssse3()    { return (_cpuFeatures & CPU_SSSE3)!= 0; }
-  static bool supports_sse4()     { return (_cpuFeatures & CPU_SSE4) != 0; }
+  static bool supports_sse4_1()   { return (_cpuFeatures & CPU_SSE4_1) != 0; }
+  static bool supports_sse4_2()   { return (_cpuFeatures & CPU_SSE4_2) != 0; }
   //
   // AMD features
   //

hotspot/src/cpu/x86/vm/vm_version_x86_64.cpp

@@ -186,8 +186,10 @@ void VM_Version::get_processor_features() {
   if (!VM_Version::supports_sse2()) {
     vm_exit_during_initialization("Unknown x64 processor: SSE2 not supported");
   }
-  if (UseSSE < 4)
+  if (UseSSE < 4) {
-    _cpuFeatures &= ~CPU_SSE4;
+    _cpuFeatures &= ~CPU_SSE4_1;
+    _cpuFeatures &= ~CPU_SSE4_2;
+  }
   if (UseSSE < 3) {
     _cpuFeatures &= ~CPU_SSE3;
     _cpuFeatures &= ~CPU_SSSE3;
@@ -204,7 +206,7 @@ void VM_Version::get_processor_features() {
   }
 
   char buf[256];
-  jio_snprintf(buf, sizeof(buf), "(%u cores per cpu, %u threads per core) family %d model %d stepping %d%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
+  jio_snprintf(buf, sizeof(buf), "(%u cores per cpu, %u threads per core) family %d model %d stepping %d%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
                cores_per_cpu(), threads_per_core(),
                cpu_family(), _model, _stepping,
                (supports_cmov() ? ", cmov" : ""),
@@ -215,7 +217,8 @@ void VM_Version::get_processor_features() {
                (supports_sse2() ? ", sse2" : ""),
                (supports_sse3() ? ", sse3" : ""),
                (supports_ssse3()? ", ssse3": ""),
-               (supports_sse4() ? ", sse4" : ""),
+               (supports_sse4_1() ? ", sse4.1" : ""),
+               (supports_sse4_2() ? ", sse4.2" : ""),
                (supports_mmx_ext() ? ", mmxext" : ""),
                (supports_3dnow()   ? ", 3dnow"  : ""),
                (supports_3dnow2()  ? ", 3dnowext" : ""),
@@ -228,7 +231,7 @@ void VM_Version::get_processor_features() {
   // older Pentiums which do not support it.
   if( UseSSE > 4 ) UseSSE=4;
   if( UseSSE < 0 ) UseSSE=0;
-  if( !supports_sse4() ) // Drop to 3 if no SSE4 support
+  if( !supports_sse4_1() ) // Drop to 3 if no SSE4 support
     UseSSE = MIN2((intx)3,UseSSE);
   if( !supports_sse3() ) // Drop to 2 if no SSE3 support
     UseSSE = MIN2((intx)2,UseSSE);
@@ -314,6 +317,14 @@ void VM_Version::get_processor_features() {
         MaxLoopPad = 11;
       }
 #endif // COMPILER2
+      if( FLAG_IS_DEFAULT(UseXMMForArrayCopy) ) {
+        UseXMMForArrayCopy = true; // use SSE2 movq on new Intel cpus
+      }
+      if( supports_sse4_2() && supports_ht() ) { // Newest Intel cpus
+        if( FLAG_IS_DEFAULT(UseUnalignedLoadStores) && UseXMMForArrayCopy ) {
+          UseUnalignedLoadStores = true; // use movdqu on newest Intel cpus
+        }
+      }
     }
   }
 
@@ -355,7 +366,7 @@ void VM_Version::get_processor_features() {
 
 #ifndef PRODUCT
   if (PrintMiscellaneous && Verbose) {
-    tty->print_cr("Logical CPUs per package: %u",
+    tty->print_cr("Logical CPUs per core: %u",
                   logical_processors_per_package());
     tty->print_cr("UseSSE=%d",UseSSE);
     tty->print("Allocation: ");

hotspot/src/cpu/x86/vm/vm_version_x86_64.hpp

@@ -68,9 +68,9 @@ public:
                cmpxchg16: 1,
                         : 4,
                dca      : 1,
-                        : 4,
+               sse4_1   : 1,
-               popcnt   : 1,
+               sse4_2   : 1,
-                        : 8;
+                        : 11;
     } bits;
   };
 
@@ -177,8 +177,9 @@ protected:
      CPU_SSE2 = (1 << 7),
      CPU_SSE3 = (1 << 8),
      CPU_SSSE3= (1 << 9),
-     CPU_SSE4 = (1 <<10),
+     CPU_SSE4A= (1 <<10),
-     CPU_SSE4A= (1 <<11)
+     CPU_SSE4_1 = (1 << 11),
+     CPU_SSE4_2 = (1 << 12)
    } cpuFeatureFlags;
 
   // cpuid information block.  All info derived from executing cpuid with
@@ -240,22 +241,14 @@ protected:
   static CpuidInfo _cpuid_info;
 
   // Extractors and predicates
-  static bool is_extended_cpu_family() {
-    const uint32_t Extended_Cpu_Family = 0xf;
-    return _cpuid_info.std_cpuid1_eax.bits.family == Extended_Cpu_Family;
-  }
   static uint32_t extended_cpu_family() {
     uint32_t result = _cpuid_info.std_cpuid1_eax.bits.family;
-    if (is_extended_cpu_family()) {
+    result += _cpuid_info.std_cpuid1_eax.bits.ext_family;
-      result += _cpuid_info.std_cpuid1_eax.bits.ext_family;
-    }
     return result;
   }
   static uint32_t extended_cpu_model() {
     uint32_t result = _cpuid_info.std_cpuid1_eax.bits.model;
-    if (is_extended_cpu_family()) {
+    result |= _cpuid_info.std_cpuid1_eax.bits.ext_model << 4;
-      result |= _cpuid_info.std_cpuid1_eax.bits.ext_model << 4;
-    }
     return result;
   }
   static uint32_t cpu_stepping() {
@@ -293,6 +286,10 @@ protected:
       result |= CPU_SSSE3;
     if (is_amd() && _cpuid_info.ext_cpuid1_ecx.bits.sse4a != 0)
       result |= CPU_SSE4A;
+    if (_cpuid_info.std_cpuid1_ecx.bits.sse4_1 != 0)
+      result |= CPU_SSE4_1;
+    if (_cpuid_info.std_cpuid1_ecx.bits.sse4_2 != 0)
+      result |= CPU_SSE4_2;
     return result;
   }
 
@@ -380,7 +377,8 @@ public:
   static bool supports_sse2()     { return (_cpuFeatures & CPU_SSE2) != 0; }
   static bool supports_sse3()     { return (_cpuFeatures & CPU_SSE3) != 0; }
   static bool supports_ssse3()    { return (_cpuFeatures & CPU_SSSE3)!= 0; }
-  static bool supports_sse4()     { return (_cpuFeatures & CPU_SSE4) != 0; }
+  static bool supports_sse4_1()   { return (_cpuFeatures & CPU_SSE4_1) != 0; }
+  static bool supports_sse4_2()   { return (_cpuFeatures & CPU_SSE4_2) != 0; }
   //
   // AMD features
   //

hotspot/src/cpu/x86/vm/x86_32.ad

@@ -4810,6 +4810,16 @@ operand immL0() %{
   interface(CONST_INTER);
 %}
 
+// Long Immediate zero
+operand immL_M1() %{
+  predicate( n->get_long() == -1L );
+  match(ConL);
+  op_cost(0);
+
+  format %{ %}
+  interface(CONST_INTER);
+%}
+
 // Long immediate from 0 to 127.
 // Used for a shorter form of long mul by 10.
 operand immL_127() %{
@@ -8621,6 +8631,18 @@ instruct xorI_eReg(eRegI dst, eRegI src, eFlagsReg cr) %{
   ins_pipe( ialu_reg_reg );
 %}
 
+// Xor Register with Immediate -1
+instruct xorI_eReg_im1(eRegI dst, immI_M1 imm) %{
+  match(Set dst (XorI dst imm));  
+
+  size(2);
+  format %{ "NOT    $dst" %}  
+  ins_encode %{
+     __ notl($dst$$Register);
+  %}
+  ins_pipe( ialu_reg );
+%}
+
 // Xor Register with Immediate
 instruct xorI_eReg_imm(eRegI dst, immI src, eFlagsReg cr) %{
   match(Set dst (XorI dst src));
@@ -8938,6 +8960,18 @@ instruct xorl_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
   ins_pipe( ialu_reg_reg_long );
 %}
 
+// Xor Long Register with Immediate -1
+instruct xorl_eReg_im1(eRegL dst, immL_M1 imm) %{
+  match(Set dst (XorL dst imm));  
+  format %{ "NOT    $dst.lo\n\t"
+            "NOT    $dst.hi" %}
+  ins_encode %{
+     __ notl($dst$$Register);
+     __ notl(HIGH_FROM_LOW($dst$$Register));
+  %}
+  ins_pipe( ialu_reg_long );
+%}
+
 // Xor Long Register with Immediate
 instruct xorl_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
   match(Set dst (XorL dst src));

hotspot/src/cpu/x86/vm/x86_64.ad

@@ -9309,6 +9309,17 @@ instruct xorI_rReg(rRegI dst, rRegI src, rFlagsReg cr)
   ins_pipe(ialu_reg_reg);
 %}
 
+// Xor Register with Immediate -1
+instruct xorI_rReg_im1(rRegI dst, immI_M1 imm) %{
+  match(Set dst (XorI dst imm));  
+
+  format %{ "not    $dst" %}  
+  ins_encode %{
+     __ notl($dst$$Register);
+  %}
+  ins_pipe(ialu_reg);
+%}
+
 // Xor Register with Immediate
 instruct xorI_rReg_imm(rRegI dst, immI src, rFlagsReg cr)
 %{
@@ -9529,6 +9540,17 @@ instruct xorL_rReg(rRegL dst, rRegL src, rFlagsReg cr)
   ins_pipe(ialu_reg_reg);
 %}
 
+// Xor Register with Immediate -1
+instruct xorL_rReg_im1(rRegL dst, immL_M1 imm) %{
+  match(Set dst (XorL dst imm));  
+
+  format %{ "notq   $dst" %}  
+  ins_encode %{
+     __ notq($dst$$Register);
+  %}
+  ins_pipe(ialu_reg);
+%}
+
 // Xor Register with Immediate
 instruct xorL_rReg_imm(rRegL dst, immL32 src, rFlagsReg cr)
 %{

hotspot/src/os/solaris/vm/os_solaris.cpp

@@ -3756,7 +3756,7 @@ int     set_lwp_priority (int ThreadID, int lwpid, int newPrio )
     int maxClamped     = MIN2(iaLimits.maxPrio, (int)iaInfo->ia_uprilim);
     iaInfo->ia_upri    = scale_to_lwp_priority(iaLimits.minPrio, maxClamped, newPrio);
     iaInfo->ia_uprilim = IA_NOCHANGE;
-    iaInfo->ia_nice    = IA_NOCHANGE;
+//    iaInfo->ia_nice    = IA_NOCHANGE;
     iaInfo->ia_mode    = IA_NOCHANGE;
     if (ThreadPriorityVerbose) {
       tty->print_cr ("IA: [%d...%d] %d->%d\n",

hotspot/src/share/vm/opto/addnode.cpp

@@ -156,7 +156,8 @@ Node *AddNode::Ideal(PhaseGVN *phase, bool can_reshape) {
   if( add1_op == this_op && !con_right ) {
     Node *a12 = add1->in(2);
     const Type *t12 = phase->type( a12 );
-    if( t12->singleton() && t12 != Type::TOP && (add1 != add1->in(1)) ) {
+    if( t12->singleton() && t12 != Type::TOP && (add1 != add1->in(1)) &&
+       !(add1->in(1)->is_Phi() && add1->in(1)->as_Phi()->is_tripcount()) ) {
       assert(add1->in(1) != this, "dead loop in AddNode::Ideal");
       add2 = add1->clone();
       add2->set_req(2, in(2));
@@ -173,7 +174,8 @@ Node *AddNode::Ideal(PhaseGVN *phase, bool can_reshape) {
   if( add2_op == this_op && !con_left ) {
     Node *a22 = add2->in(2);
     const Type *t22 = phase->type( a22 );
-    if( t22->singleton() && t22 != Type::TOP && (add2 != add2->in(1)) ) {
+    if( t22->singleton() && t22 != Type::TOP && (add2 != add2->in(1)) &&
+       !(add2->in(1)->is_Phi() && add2->in(1)->as_Phi()->is_tripcount()) ) {
       assert(add2->in(1) != this, "dead loop in AddNode::Ideal");
       Node *addx = add2->clone();
       addx->set_req(1, in(1));
@@ -225,34 +227,63 @@ const Type *AddNode::add_of_identity( const Type *t1, const Type *t2 ) const {
 //=============================================================================
 //------------------------------Idealize---------------------------------------
 Node *AddINode::Ideal(PhaseGVN *phase, bool can_reshape) {
-  int op1 = in(1)->Opcode();
+  Node* in1 = in(1);
-  int op2 = in(2)->Opcode();
+  Node* in2 = in(2);
+  int op1 = in1->Opcode();
+  int op2 = in2->Opcode();
   // Fold (con1-x)+con2 into (con1+con2)-x
+  if ( op1 == Op_AddI && op2 == Op_SubI ) {
+    // Swap edges to try optimizations below
+    in1 = in2;
+    in2 = in(1);
+    op1 = op2;
+    op2 = in2->Opcode();
+  }
   if( op1 == Op_SubI ) {
-    const Type *t_sub1 = phase->type( in(1)->in(1) );
+    const Type *t_sub1 = phase->type( in1->in(1) );
-    const Type *t_2    = phase->type( in(2)        );
+    const Type *t_2    = phase->type( in2        );
     if( t_sub1->singleton() && t_2->singleton() && t_sub1 != Type::TOP && t_2 != Type::TOP )
       return new (phase->C, 3) SubINode(phase->makecon( add_ring( t_sub1, t_2 ) ),
-                              in(1)->in(2) );
+                              in1->in(2) );
     // Convert "(a-b)+(c-d)" into "(a+c)-(b+d)"
     if( op2 == Op_SubI ) {
       // Check for dead cycle: d = (a-b)+(c-d)
-      assert( in(1)->in(2) != this && in(2)->in(2) != this,
+      assert( in1->in(2) != this && in2->in(2) != this,
               "dead loop in AddINode::Ideal" );
       Node *sub  = new (phase->C, 3) SubINode(NULL, NULL);
-      sub->init_req(1, phase->transform(new (phase->C, 3) AddINode(in(1)->in(1), in(2)->in(1) ) ));
+      sub->init_req(1, phase->transform(new (phase->C, 3) AddINode(in1->in(1), in2->in(1) ) ));
-      sub->init_req(2, phase->transform(new (phase->C, 3) AddINode(in(1)->in(2), in(2)->in(2) ) ));
+      sub->init_req(2, phase->transform(new (phase->C, 3) AddINode(in1->in(2), in2->in(2) ) ));
       return sub;
     }
+    // Convert "(a-b)+(b+c)" into "(a+c)"
+    if( op2 == Op_AddI && in1->in(2) == in2->in(1) ) {
+      assert(in1->in(1) != this && in2->in(2) != this,"dead loop in AddINode::Ideal");
+      return new (phase->C, 3) AddINode(in1->in(1), in2->in(2));
+    }
+    // Convert "(a-b)+(c+b)" into "(a+c)"
+    if( op2 == Op_AddI && in1->in(2) == in2->in(2) ) {
+      assert(in1->in(1) != this && in2->in(1) != this,"dead loop in AddINode::Ideal");
+      return new (phase->C, 3) AddINode(in1->in(1), in2->in(1));
+    }
+    // Convert "(a-b)+(b-c)" into "(a-c)"
+    if( op2 == Op_SubI && in1->in(2) == in2->in(1) ) {
+      assert(in1->in(1) != this && in2->in(2) != this,"dead loop in AddINode::Ideal");
+      return new (phase->C, 3) SubINode(in1->in(1), in2->in(2));
+    }
+    // Convert "(a-b)+(c-a)" into "(c-b)"
+    if( op2 == Op_SubI && in1->in(1) == in2->in(2) ) {
+      assert(in1->in(2) != this && in2->in(1) != this,"dead loop in AddINode::Ideal");
+      return new (phase->C, 3) SubINode(in2->in(1), in1->in(2));
+    }
   }
 
   // Convert "x+(0-y)" into "(x-y)"
-  if( op2 == Op_SubI && phase->type(in(2)->in(1)) == TypeInt::ZERO )
+  if( op2 == Op_SubI && phase->type(in2->in(1)) == TypeInt::ZERO )
-    return new (phase->C, 3) SubINode(in(1), in(2)->in(2) );
+    return new (phase->C, 3) SubINode(in1, in2->in(2) );
 
   // Convert "(0-y)+x" into "(x-y)"
-  if( op1 == Op_SubI && phase->type(in(1)->in(1)) == TypeInt::ZERO )
+  if( op1 == Op_SubI && phase->type(in1->in(1)) == TypeInt::ZERO )
-    return new (phase->C, 3) SubINode( in(2), in(1)->in(2) );
+    return new (phase->C, 3) SubINode( in2, in1->in(2) );
 
   // Convert (x>>>z)+y into (x+(y<<z))>>>z for small constant z and y.
   // Helps with array allocation math constant folding
@@ -266,15 +297,15 @@ Node *AddINode::Ideal(PhaseGVN *phase, bool can_reshape) {
   // Have not observed cases where type information exists to support
   // positive y and (x <= -(y << z))
   if( op1 == Op_URShiftI && op2 == Op_ConI &&
-      in(1)->in(2)->Opcode() == Op_ConI ) {
+      in1->in(2)->Opcode() == Op_ConI ) {
-    jint z = phase->type( in(1)->in(2) )->is_int()->get_con() & 0x1f; // only least significant 5 bits matter
+    jint z = phase->type( in1->in(2) )->is_int()->get_con() & 0x1f; // only least significant 5 bits matter
-    jint y = phase->type( in(2) )->is_int()->get_con();
+    jint y = phase->type( in2 )->is_int()->get_con();
 
     if( z < 5 && -5 < y && y < 0 ) {
-      const Type *t_in11 = phase->type(in(1)->in(1));
+      const Type *t_in11 = phase->type(in1->in(1));
       if( t_in11 != Type::TOP && (t_in11->is_int()->_lo >= -(y << z)) ) {
-        Node *a = phase->transform( new (phase->C, 3) AddINode( in(1)->in(1), phase->intcon(y<<z) ) );
+        Node *a = phase->transform( new (phase->C, 3) AddINode( in1->in(1), phase->intcon(y<<z) ) );
-        return new (phase->C, 3) URShiftINode( a, in(1)->in(2) );
+        return new (phase->C, 3) URShiftINode( a, in1->in(2) );
       }
     }
   }
@@ -328,39 +359,73 @@ const Type *AddINode::add_ring( const Type *t0, const Type *t1 ) const {
 //=============================================================================
 //------------------------------Idealize---------------------------------------
 Node *AddLNode::Ideal(PhaseGVN *phase, bool can_reshape) {
-  int op1 = in(1)->Opcode();
+  Node* in1 = in(1);
-  int op2 = in(2)->Opcode();
+  Node* in2 = in(2);
+  int op1 = in1->Opcode();
+  int op2 = in2->Opcode();
+  // Fold (con1-x)+con2 into (con1+con2)-x
+  if ( op1 == Op_AddL && op2 == Op_SubL ) {
+    // Swap edges to try optimizations below
+    in1 = in2;
+    in2 = in(1);
+    op1 = op2;
+    op2 = in2->Opcode();
+  }
   // Fold (con1-x)+con2 into (con1+con2)-x
   if( op1 == Op_SubL ) {
-    const Type *t_sub1 = phase->type( in(1)->in(1) );
+    const Type *t_sub1 = phase->type( in1->in(1) );
-    const Type *t_2    = phase->type( in(2)        );
+    const Type *t_2    = phase->type( in2        );
     if( t_sub1->singleton() && t_2->singleton() && t_sub1 != Type::TOP && t_2 != Type::TOP )
       return new (phase->C, 3) SubLNode(phase->makecon( add_ring( t_sub1, t_2 ) ),
-                              in(1)->in(2) );
+                              in1->in(2) );
     // Convert "(a-b)+(c-d)" into "(a+c)-(b+d)"
     if( op2 == Op_SubL ) {
       // Check for dead cycle: d = (a-b)+(c-d)
-      assert( in(1)->in(2) != this && in(2)->in(2) != this,
+      assert( in1->in(2) != this && in2->in(2) != this,
               "dead loop in AddLNode::Ideal" );
       Node *sub  = new (phase->C, 3) SubLNode(NULL, NULL);
-      sub->init_req(1, phase->transform(new (phase->C, 3) AddLNode(in(1)->in(1), in(2)->in(1) ) ));
+      sub->init_req(1, phase->transform(new (phase->C, 3) AddLNode(in1->in(1), in2->in(1) ) ));
-      sub->init_req(2, phase->transform(new (phase->C, 3) AddLNode(in(1)->in(2), in(2)->in(2) ) ));
+      sub->init_req(2, phase->transform(new (phase->C, 3) AddLNode(in1->in(2), in2->in(2) ) ));
       return sub;
     }
+    // Convert "(a-b)+(b+c)" into "(a+c)"
+    if( op2 == Op_AddL && in1->in(2) == in2->in(1) ) {
+      assert(in1->in(1) != this && in2->in(2) != this,"dead loop in AddLNode::Ideal");
+      return new (phase->C, 3) AddLNode(in1->in(1), in2->in(2));
+    }
+    // Convert "(a-b)+(c+b)" into "(a+c)"
+    if( op2 == Op_AddL && in1->in(2) == in2->in(2) ) {
+      assert(in1->in(1) != this && in2->in(1) != this,"dead loop in AddLNode::Ideal");
+      return new (phase->C, 3) AddLNode(in1->in(1), in2->in(1));
+    }
+    // Convert "(a-b)+(b-c)" into "(a-c)"
+    if( op2 == Op_SubL && in1->in(2) == in2->in(1) ) {
+      assert(in1->in(1) != this && in2->in(2) != this,"dead loop in AddLNode::Ideal");
+      return new (phase->C, 3) SubLNode(in1->in(1), in2->in(2));
+    }
+    // Convert "(a-b)+(c-a)" into "(c-b)"
+    if( op2 == Op_SubL && in1->in(1) == in1->in(2) ) {
+      assert(in1->in(2) != this && in2->in(1) != this,"dead loop in AddLNode::Ideal");
+      return new (phase->C, 3) SubLNode(in2->in(1), in1->in(2));
+    }
   }
 
   // Convert "x+(0-y)" into "(x-y)"
-  if( op2 == Op_SubL && phase->type(in(2)->in(1)) == TypeLong::ZERO )
+  if( op2 == Op_SubL && phase->type(in2->in(1)) == TypeLong::ZERO )
-    return new (phase->C, 3) SubLNode(in(1), in(2)->in(2) );
+    return new (phase->C, 3) SubLNode( in1, in2->in(2) );
+
+  // Convert "(0-y)+x" into "(x-y)"
+  if( op1 == Op_SubL && phase->type(in1->in(1)) == TypeInt::ZERO )
+    return new (phase->C, 3) SubLNode( in2, in1->in(2) );
 
   // Convert "X+X+X+X+X...+X+Y" into "k*X+Y" or really convert "X+(X+Y)"
   // into "(X<<1)+Y" and let shift-folding happen.
   if( op2 == Op_AddL &&
-      in(2)->in(1) == in(1) &&
+      in2->in(1) == in1 &&
       op1 != Op_ConL &&
       0 ) {
-    Node *shift = phase->transform(new (phase->C, 3) LShiftLNode(in(1),phase->intcon(1)));
+    Node *shift = phase->transform(new (phase->C, 3) LShiftLNode(in1,phase->intcon(1)));
-    return new (phase->C, 3) AddLNode(shift,in(2)->in(2));
+    return new (phase->C, 3) AddLNode(shift,in2->in(2));
   }
 
   return AddNode::Ideal(phase, can_reshape);

hotspot/src/share/vm/opto/cfgnode.cpp

@@ -1817,6 +1817,12 @@ Node *PhiNode::Ideal(PhaseGVN *phase, bool can_reshape) {
   return progress;              // Return any progress
 }
 
+//------------------------------is_tripcount-----------------------------------
+bool PhiNode::is_tripcount() const {
+  return (in(0) != NULL && in(0)->is_CountedLoop() &&
+          in(0)->as_CountedLoop()->phi() == this);
+}
+
 //------------------------------out_RegMask------------------------------------
 const RegMask &PhiNode::in_RegMask(uint i) const {
   return i ? out_RegMask() : RegMask::Empty;
@@ -1832,9 +1838,7 @@ const RegMask &PhiNode::out_RegMask() const {
 #ifndef PRODUCT
 void PhiNode::dump_spec(outputStream *st) const {
   TypeNode::dump_spec(st);
-  if (in(0) != NULL &&
+  if (is_tripcount()) {
-      in(0)->is_CountedLoop() &&
-      in(0)->as_CountedLoop()->phi() == this) {
     st->print(" #tripcount");
   }
 }

hotspot/src/share/vm/opto/cfgnode.hpp

@@ -162,6 +162,8 @@ public:
     return NULL;  // not a copy!
   }
 
+  bool is_tripcount() const;
+
   // Determine a unique non-trivial input, if any.
   // Ignore casts if it helps.  Return NULL on failure.
   Node* unique_input(PhaseTransform *phase);

hotspot/src/share/vm/opto/divnode.cpp

@@ -110,10 +110,13 @@ static Node *transform_int_divide( PhaseGVN *phase, Node *dividend, jint divisor
     } else if( dividend->Opcode() == Op_AndI ) {
       // An AND mask of sufficient size clears the low bits and
       // I can avoid rounding.
-      const TypeInt *andconi = phase->type( dividend->in(2) )->isa_int();
+      const TypeInt *andconi_t = phase->type( dividend->in(2) )->isa_int();
-      if( andconi && andconi->is_con(-d) ) {
+      if( andconi_t && andconi_t->is_con() ) {
-        dividend = dividend->in(1);
+        jint andconi = andconi_t->get_con();
-        needs_rounding = false;
+        if( andconi < 0 && is_power_of_2(-andconi) && (-andconi) >= d ) {
+          dividend = dividend->in(1);
+          needs_rounding = false;
+        }
       }
     }
 
@@ -316,10 +319,13 @@ static Node *transform_long_divide( PhaseGVN *phase, Node *dividend, jlong divis
     } else if( dividend->Opcode() == Op_AndL ) {
       // An AND mask of sufficient size clears the low bits and
       // I can avoid rounding.
-      const TypeLong *andconl = phase->type( dividend->in(2) )->isa_long();
+      const TypeLong *andconl_t = phase->type( dividend->in(2) )->isa_long();
-      if( andconl && andconl->is_con(-d)) {
+      if( andconl_t && andconl_t->is_con() ) {
-        dividend = dividend->in(1);
+        jlong andconl = andconl_t->get_con();
-        needs_rounding = false;
+        if( andconl < 0 && is_power_of_2_long(-andconl) && (-andconl) >= d ) {
+          dividend = dividend->in(1);
+          needs_rounding = false;
+        }
       }
     }
 
@@ -704,11 +710,18 @@ const Type *DivDNode::Value( PhaseTransform *phase ) const {
   if( t2 == TypeD::ONE )
     return t1;
 
-  // If divisor is a constant and not zero, divide them numbers
+#if defined(IA32)
-  if( t1->base() == Type::DoubleCon &&
+  if (!phase->C->method()->is_strict())
-      t2->base() == Type::DoubleCon &&
+    // Can't trust native compilers to properly fold strict double
-      t2->getd() != 0.0 ) // could be negative zero
+    // division with round-to-zero on this platform.
-    return TypeD::make( t1->getd()/t2->getd() );
+#endif
+    {
+      // If divisor is a constant and not zero, divide them numbers
+      if( t1->base() == Type::DoubleCon &&
+          t2->base() == Type::DoubleCon &&
+          t2->getd() != 0.0 ) // could be negative zero
+        return TypeD::make( t1->getd()/t2->getd() );
+    }
 
   // If the dividend is a constant zero
   // Note: if t1 and t2 are zero then result is NaN (JVMS page 213)

hotspot/src/share/vm/opto/loopTransform.cpp

@@ -679,6 +679,10 @@ void PhaseIdealLoop::insert_pre_post_loops( IdealLoopTree *loop, Node_List &old_
   CountedLoopNode *post_head = old_new[main_head->_idx]->as_CountedLoop();
   post_head->set_post_loop(main_head);
 
+  // Reduce the post-loop trip count.
+  CountedLoopEndNode* post_end = old_new[main_end ->_idx]->as_CountedLoopEnd();
+  post_end->_prob = PROB_FAIR;
+
   // Build the main-loop normal exit.
   IfFalseNode *new_main_exit = new (C, 1) IfFalseNode(main_end);
   _igvn.register_new_node_with_optimizer( new_main_exit );
@@ -748,6 +752,9 @@ void PhaseIdealLoop::insert_pre_post_loops( IdealLoopTree *loop, Node_List &old_
   pre_head->set_pre_loop(main_head);
   Node *pre_incr = old_new[incr->_idx];
 
+  // Reduce the pre-loop trip count.
+  pre_end->_prob = PROB_FAIR;
+
   // Find the pre-loop normal exit.
   Node* pre_exit = pre_end->proj_out(false);
   assert( pre_exit->Opcode() == Op_IfFalse, "" );
@@ -767,8 +774,8 @@ void PhaseIdealLoop::insert_pre_post_loops( IdealLoopTree *loop, Node_List &old_
   register_new_node( min_cmp , new_pre_exit );
   register_new_node( min_bol , new_pre_exit );
 
-  // Build the IfNode
+  // Build the IfNode (assume the main-loop is executed always).
-  IfNode *min_iff = new (C, 2) IfNode( new_pre_exit, min_bol, PROB_FAIR, COUNT_UNKNOWN );
+  IfNode *min_iff = new (C, 2) IfNode( new_pre_exit, min_bol, PROB_ALWAYS, COUNT_UNKNOWN );
   _igvn.register_new_node_with_optimizer( min_iff );
   set_idom(min_iff, new_pre_exit, dd_main_head);
   set_loop(min_iff, loop->_parent);
@@ -1583,10 +1590,10 @@ bool IdealLoopTree::policy_do_remove_empty_loop( PhaseIdealLoop *phase ) {
 
 //=============================================================================
 //------------------------------iteration_split_impl---------------------------
-void IdealLoopTree::iteration_split_impl( PhaseIdealLoop *phase, Node_List &old_new ) {
+bool IdealLoopTree::iteration_split_impl( PhaseIdealLoop *phase, Node_List &old_new ) {
   // Check and remove empty loops (spam micro-benchmarks)
   if( policy_do_remove_empty_loop(phase) )
-    return;                     // Here we removed an empty loop
+    return true;                     // Here we removed an empty loop
 
   bool should_peel = policy_peeling(phase); // Should we peel?
 
@@ -1596,7 +1603,8 @@ void IdealLoopTree::iteration_split_impl( PhaseIdealLoop *phase, Node_List &old_
   // This removes loop-invariant tests (usually null checks).
   if( !_head->is_CountedLoop() ) { // Non-counted loop
     if (PartialPeelLoop && phase->partial_peel(this, old_new)) {
-      return;
+      // Partial peel succeeded so terminate this round of loop opts
+      return false;
     }
     if( should_peel ) {            // Should we peel?
 #ifndef PRODUCT
@@ -1606,14 +1614,14 @@ void IdealLoopTree::iteration_split_impl( PhaseIdealLoop *phase, Node_List &old_
     } else if( should_unswitch ) {
       phase->do_unswitching(this, old_new);
     }
-    return;
+    return true;
   }
   CountedLoopNode *cl = _head->as_CountedLoop();
 
-  if( !cl->loopexit() ) return; // Ignore various kinds of broken loops
+  if( !cl->loopexit() ) return true; // Ignore various kinds of broken loops
 
   // Do nothing special to pre- and post- loops
-  if( cl->is_pre_loop() || cl->is_post_loop() ) return;
+  if( cl->is_pre_loop() || cl->is_post_loop() ) return true;
 
   // Compute loop trip count from profile data
   compute_profile_trip_cnt(phase);
@@ -1626,11 +1634,11 @@ void IdealLoopTree::iteration_split_impl( PhaseIdealLoop *phase, Node_List &old_
       // Here we did some unrolling and peeling.  Eventually we will
       // completely unroll this loop and it will no longer be a loop.
       phase->do_maximally_unroll(this,old_new);
-      return;
+      return true;
     }
     if (should_unswitch) {
       phase->do_unswitching(this, old_new);
-      return;
+      return true;
     }
   }
 
@@ -1691,14 +1699,16 @@ void IdealLoopTree::iteration_split_impl( PhaseIdealLoop *phase, Node_List &old_
     if( should_peel )           // Might want to peel but do nothing else
       phase->do_peeling(this,old_new);
   }
+  return true;
 }
 
 
 //=============================================================================
 //------------------------------iteration_split--------------------------------
-void IdealLoopTree::iteration_split( PhaseIdealLoop *phase, Node_List &old_new ) {
+bool IdealLoopTree::iteration_split( PhaseIdealLoop *phase, Node_List &old_new ) {
   // Recursively iteration split nested loops
-  if( _child ) _child->iteration_split( phase, old_new );
+  if( _child && !_child->iteration_split( phase, old_new ))
+    return false;
 
   // Clean out prior deadwood
   DCE_loop_body();
@@ -1720,7 +1730,9 @@ void IdealLoopTree::iteration_split( PhaseIdealLoop *phase, Node_List &old_new )
       _allow_optimizations &&
       !tail()->is_top() ) {     // Also ignore the occasional dead backedge
     if (!_has_call) {
-      iteration_split_impl( phase, old_new );
+      if (!iteration_split_impl( phase, old_new )) {
+        return false;
+      }
     } else if (policy_unswitching(phase)) {
       phase->do_unswitching(this, old_new);
     }
@@ -1729,5 +1741,7 @@ void IdealLoopTree::iteration_split( PhaseIdealLoop *phase, Node_List &old_new )
   // Minor offset re-organization to remove loop-fallout uses of
   // trip counter.
   if( _head->is_CountedLoop() ) phase->reorg_offsets( this );
-  if( _next ) _next->iteration_split( phase, old_new );
+  if( _next && !_next->iteration_split( phase, old_new ))
+    return false;
+  return true;
 }

hotspot/src/share/vm/opto/loopnode.hpp

@@ -325,12 +325,14 @@ public:
   // Returns TRUE if loop tree is structurally changed.
   bool beautify_loops( PhaseIdealLoop *phase );
 
-  // Perform iteration-splitting on inner loops.  Split iterations to avoid
+  // Perform iteration-splitting on inner loops.  Split iterations to
-  // range checks or one-shot null checks.
+  // avoid range checks or one-shot null checks.  Returns false if the
-  void iteration_split( PhaseIdealLoop *phase, Node_List &old_new );
+  // current round of loop opts should stop.
+  bool iteration_split( PhaseIdealLoop *phase, Node_List &old_new );
 
-  // Driver for various flavors of iteration splitting
+  // Driver for various flavors of iteration splitting.  Returns false
-  void iteration_split_impl( PhaseIdealLoop *phase, Node_List &old_new );
+  // if the current round of loop opts should stop.
+  bool iteration_split_impl( PhaseIdealLoop *phase, Node_List &old_new );
 
   // Given dominators, try to find loops with calls that must always be
   // executed (call dominates loop tail).  These loops do not need non-call

hotspot/src/share/vm/opto/loopopts.cpp

@@ -1903,9 +1903,6 @@ void PhaseIdealLoop::clone_for_use_outside_loop( IdealLoopTree *loop, Node* n, N
       // Use in a phi is considered a use in the associated predecessor block
       use_c = use->in(0)->in(j);
     }
-    if (use_c->is_CountedLoop()) {
-      use_c = use_c->in(LoopNode::EntryControl);
-    }
     set_ctrl(n_clone, use_c);
     assert(!loop->is_member(get_loop(use_c)), "should be outside loop");
     get_loop(use_c)->_body.push(n_clone);

hotspot/src/share/vm/opto/mulnode.cpp

@@ -152,6 +152,14 @@ const Type *MulNode::Value( PhaseTransform *phase ) const {
   if( t1 == Type::BOTTOM || t2 == Type::BOTTOM )
     return bottom_type();
 
+#if defined(IA32)
+  // Can't trust native compilers to properly fold strict double
+  // multiplication with round-to-zero on this platform.
+  if (op == Op_MulD && phase->C->method()->is_strict()) {
+    return TypeD::DOUBLE;
+  }
+#endif
+
   return mul_ring(t1,t2);            // Local flavor of type multiplication
 }
 
@@ -360,7 +368,7 @@ const Type *MulFNode::mul_ring(const Type *t0, const Type *t1) const {
 // Compute the product type of two double ranges into this node.
 const Type *MulDNode::mul_ring(const Type *t0, const Type *t1) const {
   if( t0 == Type::DOUBLE || t1 == Type::DOUBLE ) return Type::DOUBLE;
-  // We must be adding 2 double constants.
+  // We must be multiplying 2 double constants.
   return TypeD::make( t0->getd() * t1->getd() );
 }
 

hotspot/src/share/vm/opto/node.hpp

@@ -1320,7 +1320,8 @@ public:
   Node *pop() {
     if( _clock_index >= size() ) _clock_index = 0;
     Node *b = at(_clock_index);
-    map( _clock_index++, Node_List::pop());
+    map( _clock_index, Node_List::pop());
+    if (size() != 0) _clock_index++; // Always start from 0
     _in_worklist >>= b->_idx;
     return b;
   }

hotspot/src/share/vm/opto/postaloc.cpp

@@ -34,7 +34,7 @@ static bool is_single_register(uint x) {
 #endif
 }
 
-//------------------------------may_be_copy_of_callee-----------------------------
+//---------------------------may_be_copy_of_callee-----------------------------
 // Check to see if we can possibly be a copy of a callee-save value.
 bool PhaseChaitin::may_be_copy_of_callee( Node *def ) const {
   // Short circuit if there are no callee save registers
@@ -225,6 +225,20 @@ int PhaseChaitin::elide_copy( Node *n, int k, Block *current_block, Node_List &v
 
   // Scan all registers to see if this value is around already
   for( uint reg = 0; reg < (uint)_max_reg; reg++ ) {
+    if (reg == (uint)nk_reg) {
+      // Found ourselves so check if there is only one user of this
+      // copy and keep on searching for a better copy if so.
+      bool ignore_self = true;
+      x = n->in(k);
+      DUIterator_Fast imax, i = x->fast_outs(imax);
+      Node* first = x->fast_out(i); i++;
+      while (i < imax && ignore_self) {
+        Node* use = x->fast_out(i); i++;
+        if (use != first) ignore_self = false;
+      }
+      if (ignore_self) continue;
+    }
+
     Node *vv = value[reg];
     if( !single ) {             // Doubles check for aligned-adjacent pair
       if( (reg&1)==0 ) continue;  // Wrong half of a pair

hotspot/src/share/vm/opto/subnode.cpp

@@ -206,6 +206,14 @@ Node *SubINode::Ideal(PhaseGVN *phase, bool can_reshape){
   if( op1 == Op_AddI && op2 == Op_AddI && in1->in(2) == in2->in(2) )
     return new (phase->C, 3) SubINode( in1->in(1), in2->in(1) );
 
+  // Convert "(A+X) - (X+B)" into "A - B"
+  if( op1 == Op_AddI && op2 == Op_AddI && in1->in(2) == in2->in(1) )
+    return new (phase->C, 3) SubINode( in1->in(1), in2->in(2) );
+
+  // Convert "(X+A) - (B+X)" into "A - B"
+  if( op1 == Op_AddI && op2 == Op_AddI && in1->in(1) == in2->in(2) )
+    return new (phase->C, 3) SubINode( in1->in(2), in2->in(1) );
+
   // Convert "A-(B-C)" into (A+C)-B", since add is commutative and generally
   // nicer to optimize than subtract.
   if( op2 == Op_SubI && in2->outcnt() == 1) {

hotspot/src/share/vm/runtime/globals.hpp

@@ -997,6 +997,12 @@ class CommandLineFlags {
   product(bool, UseXmmI2F, false,                                           \
           "Use SSE2 CVTDQ2PS instruction to convert Integer to Float")      \
                                                                             \
+  product(bool, UseXMMForArrayCopy, false,                                  \
+          "Use SSE2 MOVQ instruction for Arraycopy")                        \
+                                                                            \
+  product(bool, UseUnalignedLoadStores, false,                              \
+          "Use SSE2 MOVDQU instruction for Arraycopy")                      \
+                                                                            \
   product(intx, FieldsAllocationStyle, 1,                                   \
           "0 - type based with oops first, 1 - with oops last")             \
                                                                             \
@@ -2555,7 +2561,7 @@ class CommandLineFlags {
   develop(intx, MaxRecursiveInlineLevel, 1,                                 \
           "maximum number of nested recursive calls that are inlined")      \
                                                                             \
-  develop(intx, InlineSmallCode, 1000,                                      \
+  product(intx, InlineSmallCode, 1000,                                      \
           "Only inline already compiled methods if their code size is "     \
           "less than this")                                                 \
                                                                             \

hotspot/test/compiler/6700047/Test6700047.java

@@ -29,6 +29,8 @@
  */
 
 public class Test6700047 {
+    static byte[] dummy = new byte[256];
+
     public static void main(String[] args) {
         for (int i = 0; i < 100000; i++) {
             intToLeftPaddedAsciiBytes();
@@ -53,6 +55,7 @@ public class Test6700047 {
         if (offset > 0) {
             for(int j = 0; j < offset; j++) {
                 result++;
+                dummy[i] = 0;
             }
         }
         return result;