This variable was dropped in the pkg-config migration, which resulted
in spurious warnings about using valgrind with external PCRE. Fix the
checks to use the right variable.
RFC: https://wiki.php.net/rfc/typed_properties_v2
This is a squash of PR #3734, which is a squash of PR #3313.
Co-authored-by: Bob Weinand <bobwei9@hotmail.com>
Co-authored-by: Joe Watkins <krakjoe@php.net>
Co-authored-by: Dmitry Stogov <dmitry@zend.com>
This parameter is always zero and not necessary to call pcre2_match.
I'm leaving the parameter behind on the _ex() variant, so the preg_flags
are still accessible in some way.
Set preg_options to 0 in php_pcre_get_compiled_regex(_ex). These
options are intended to be passed to pcre2_match. However, we do
not have any flags that actually need to be set during matching
(all relevant flags are set during compilation), and the preg_flags
value is used for PHP-specific flags instead.
This parameter should be removed entirely in master to avoid confusion.
Use standard PKG_CHECK_MODULES macro and remove the fallback case.
The option is renamed to --with-external-pcre and no longer accepts
an explicit path -- it should be specified through pkg-config instead.
The pcre2_jit_compile_8 sysmbol is always available, even JIT might be
not. If JIT is not enabled explicitly and is enabled in the PHP runtime,
this will lead to a malfunction. This approach ensures JIT is indeed
available on the given platform. For cross compilation this might get
complicated, as it would require an explicit processor architecture and
PCRE2 version check.
Another solution for this case is to run pcre2_config at runtime. That
however would require more condition checks that would impact
architectures where JIT is available.
This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines in all
*.phpt sections.
According to POSIX, a line is a sequence of zero or more non-' <newline>'
characters plus a terminating '<newline>' character. [1] Files should
normally have at least one final newline character.
C89 [2] and later standards [3] mention a final newline:
"A source file that is not empty shall end in a new-line character,
which shall not be immediately preceded by a backslash character."
Although it is not mandatory for all files to have a final newline
fixed, a more consistent and homogeneous approach brings less of commit
differences issues and a better development experience in certain text
editors and IDEs.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_206
[2] https://port70.net/~nsz/c/c89/c89-draft.html#2.1.1.2
[3] https://port70.net/~nsz/c/c99/n1256.html#5.1.1.2
This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines in all
*.phpt sections.
According to POSIX, a line is a sequence of zero or more non-' <newline>'
characters plus a terminating '<newline>' character. [1] Files should
normally have at least one final newline character.
C89 [2] and later standards [3] mention a final newline:
"A source file that is not empty shall end in a new-line character,
which shall not be immediately preceded by a backslash character."
Although it is not mandatory for all files to have a final newline
fixed, a more consistent and homogeneous approach brings less of commit
differences issues and a better development experience in certain text
editors and IDEs.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_206
[2] https://port70.net/~nsz/c/c89/c89-draft.html#2.1.1.2
[3] https://port70.net/~nsz/c/c99/n1256.html#5.1.1.2
This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines in all
*.phpt sections.
According to POSIX, a line is a sequence of zero or more non-' <newline>'
characters plus a terminating '<newline>' character. [1] Files should
normally have at least one final newline character.
C89 [2] and later standards [3] mention a final newline:
"A source file that is not empty shall end in a new-line character,
which shall not be immediately preceded by a backslash character."
Although it is not mandatory for all files to have a final newline
fixed, a more consistent and homogeneous approach brings less of commit
differences issues and a better development experience in certain text
editors and IDEs.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_206
[2] https://port70.net/~nsz/c/c89/c89-draft.html#2.1.1.2
[3] https://port70.net/~nsz/c/c99/n1256.html#5.1.1.2
This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines in all
*.phpt sections.
According to POSIX, a line is a sequence of zero or more non-' <newline>'
characters plus a terminating '<newline>' character. [1] Files should
normally have at least one final newline character.
C89 [2] and later standards [3] mention a final newline:
"A source file that is not empty shall end in a new-line character,
which shall not be immediately preceded by a backslash character."
Although it is not mandatory for all files to have a final newline
fixed, a more consistent and homogeneous approach brings less of commit
differences issues and a better development experience in certain text
editors and IDEs.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_206
[2] https://port70.net/~nsz/c/c89/c89-draft.html#2.1.1.2
[3] https://port70.net/~nsz/c/c99/n1256.html#5.1.1.2
This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines.
According to POSIX, a line is a sequence of zero or more non-' <newline>'
characters plus a terminating '<newline>' character. [1] Files should
normally have at least one final newline character.
C89 [2] and later standards [3] mention a final newline:
"A source file that is not empty shall end in a new-line character,
which shall not be immediately preceded by a backslash character."
Although it is not mandatory for all files to have a final newline
fixed, a more consistent and homogeneous approach brings less of commit
differences issues and a better development experience in certain text
editors and IDEs.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_206
[2] https://port70.net/~nsz/c/c89/c89-draft.html#2.1.1.2
[3] https://port70.net/~nsz/c/c99/n1256.html#5.1.1.2
This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines.
According to POSIX, a line is a sequence of zero or more non-' <newline>'
characters plus a terminating '<newline>' character. [1] Files should
normally have at least one final newline character.
C89 [2] and later standards [3] mention a final newline:
"A source file that is not empty shall end in a new-line character,
which shall not be immediately preceded by a backslash character."
Although it is not mandatory for all files to have a final newline
fixed, a more consistent and homogeneous approach brings less of commit
differences issues and a better development experience in certain text
editors and IDEs.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_206
[2] https://port70.net/~nsz/c/c89/c89-draft.html#2.1.1.2
[3] https://port70.net/~nsz/c/c99/n1256.html#5.1.1.2
This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines.
According to POSIX, a line is a sequence of zero or more non-' <newline>'
characters plus a terminating '<newline>' character. [1] Files should
normally have at least one final newline character.
C89 [2] and later standards [3] mention a final newline:
"A source file that is not empty shall end in a new-line character,
which shall not be immediately preceded by a backslash character."
Although it is not mandatory for all files to have a final newline
fixed, a more consistent and homogeneous approach brings less of commit
differences issues and a better development experience in certain text
editors and IDEs.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_206
[2] https://port70.net/~nsz/c/c89/c89-draft.html#2.1.1.2
[3] https://port70.net/~nsz/c/c99/n1256.html#5.1.1.2
This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines.
According to POSIX, a line is a sequence of zero or more non-' <newline>'
characters plus a terminating '<newline>' character. [1] Files should
normally have at least one final newline character.
C89 [2] and later standards [3] mention a final newline:
"A source file that is not empty shall end in a new-line character,
which shall not be immediately preceded by a backslash character."
Although it is not mandatory for all files to have a final newline
fixed, a more consistent and homogeneous approach brings less of commit
differences issues and a better development experience in certain text
editors and IDEs.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_206
[2] https://port70.net/~nsz/c/c89/c89-draft.html#2.1.1.2
[3] https://port70.net/~nsz/c/c99/n1256.html#5.1.1.2
This patch simplifies line endings tracked in the Git repository and
syncs them to all include the LF style instead of the CRLF files.
Newline characters:
- LF (\n) (*nix and Mac)
- CRLF (\r\n) (Windows)
- CR (\r) (old Mac, obsolete)
To see which line endings are in the index and in the working copy the
following command can be used:
`git ls-files --eol`
Git additionally provides `.gitattributes` file to specify if some files
need to have specific line endings on all platforms (either CRLF or LF).
Changed files shouldn't cause issues on modern Windows platforms because
also Git can do output conversion is core.autocrlf=true is set on
Windows and use CRLF newlines in all files in the working tree.
Unless CRLF files are tracked specifically, Git by default tracks all
files in the index using LF newlines.
This patch simplifies line endings tracked in the Git repository and
syncs them to all include the LF style instead of the CRLF files.
Newline characters:
- LF (\n) (*nix and Mac)
- CRLF (\r\n) (Windows)
- CR (\r) (old Mac, obsolete)
To see which line endings are in the index and in the working copy the
following command can be used:
`git ls-files --eol`
Git additionally provides `.gitattributes` file to specify if some files
need to have specific line endings on all platforms (either CRLF or LF).
Changed files shouldn't cause issues on modern Windows platforms because
also Git can do output conversion is core.autocrlf=true is set on
Windows and use CRLF newlines in all files in the working tree.
Unless CRLF files are tracked specifically, Git by default tracks all
files in the index using LF newlines.
This patch simplifies line endings tracked in the Git repository and
syncs them to all include the LF style instead of the CRLF files.
Newline characters:
- LF (\n) (*nix and Mac)
- CRLF (\r\n) (Windows)
- CR (\r) (old Mac, obsolete)
To see which line endings are in the index and in the working copy the
following command can be used:
`git ls-files --eol`
Git additionally provides `.gitattributes` file to specify if some files
need to have specific line endings on all platforms (either CRLF or LF).
Changed files shouldn't cause issues on modern Windows platforms because
also Git can do output conversion is core.autocrlf=true is set on
Windows and use CRLF newlines in all files in the working tree.
Unless CRLF files are tracked specifically, Git by default tracks all
files in the index using LF newlines.
This patch simplifies line endings tracked in the Git repository and
syncs them to all include the LF style instead of the CRLF files.
Newline characters:
- LF (\n) (*nix and Mac)
- CRLF (\r\n) (Windows)
- CR (\r) (old Mac, obsolete)
To see which line endings are in the index and in the working copy the
following command can be used:
`git ls-files --eol`
Git additionally provides `.gitattributes` file to specify if some files
need to have specific line endings on all platforms (either CRLF or LF).
Changed files shouldn't cause issues on modern Windows platforms because
also Git can do output conversion is core.autocrlf=true is set on
Windows and use CRLF newlines in all files in the working tree.
Unless CRLF files are tracked specifically, Git by default tracks all
files in the index using LF newlines.
