One of the biggest remaining contention point is `RClass.cc_table`.
The logical solution would be to turn it into a managed object, so
we can use an RCU strategy, given it's read heavy.
However, that's not currently possible because the table can't
be freed before the owning class, given the class free function
MUST go over all the CC entries to invalidate them.
However if the `CC->klass` reference is weak marked, then the
GC will take care of setting the reference to `Qundef`.
This behave almost exactly as a T_OBJECT, the layout is entirely
compatible.
This aims to solve two problems.
First, it solves the problem of namspaced classes having
a single `shape_id`. Now each namespaced classext
has an object that can hold the namespace specific
shape.
Second, it open the door to later make class instance variable
writes atomics, hence be able to read class variables
without locking the VM.
In the future, in multi-ractor mode, we can do the write
on a copy of the `fields_obj` and then atomically swap it.
Considerations:
- Right now the `RClass` shape_id is always synchronized,
but with namespace we should likely mark classes that have
multiple namespace with a specific shape flag.
This commit inlines instructions for Class#new. To make this work, we
added a new YARV instructions, `opt_new`. `opt_new` checks whether or
not the `new` method is the default allocator method. If it is, it
allocates the object, and pushes the instance on the stack. If not, the
instruction jumps to the "slow path" method call instructions.
Old instructions:
```
> ruby --dump=insns -e'Object.new'
== disasm: #<ISeq:<main>@-e:1 (1,0)-(1,10)>
0000 opt_getconstant_path <ic:0 Object> ( 1)[Li]
0002 opt_send_without_block <calldata!mid:new, argc:0, ARGS_SIMPLE>
0004 leave
```
New instructions:
```
> ./miniruby --dump=insns -e'Object.new'
== disasm: #<ISeq:<main>@-e:1 (1,0)-(1,10)>
0000 opt_getconstant_path <ic:0 Object> ( 1)[Li]
0002 putnil
0003 swap
0004 opt_new <calldata!mid:new, argc:0, ARGS_SIMPLE>, 11
0007 opt_send_without_block <calldata!mid:initialize, argc:0, FCALL|ARGS_SIMPLE>
0009 jump 14
0011 opt_send_without_block <calldata!mid:new, argc:0, ARGS_SIMPLE>
0013 swap
0014 pop
0015 leave
```
This commit speeds up basic object allocation (`Foo.new`) by 60%, but
classes that take keyword parameters see an even bigger benefit because
no hash is allocated when instantiating the object (3x to 6x faster).
Here is an example that uses `Hash.new(capacity: 0)`:
```
> hyperfine "ruby --disable-gems -e'i = 0; while i < 10_000_000; Hash.new(capacity: 0); i += 1; end'" "./ruby --disable-gems -e'i = 0; while i < 10_000_000; Hash.new(capacity: 0); i += 1; end'"
Benchmark 1: ruby --disable-gems -e'i = 0; while i < 10_000_000; Hash.new(capacity: 0); i += 1; end'
Time (mean ± σ): 1.082 s ± 0.004 s [User: 1.074 s, System: 0.008 s]
Range (min … max): 1.076 s … 1.088 s 10 runs
Benchmark 2: ./ruby --disable-gems -e'i = 0; while i < 10_000_000; Hash.new(capacity: 0); i += 1; end'
Time (mean ± σ): 627.9 ms ± 3.5 ms [User: 622.7 ms, System: 4.8 ms]
Range (min … max): 622.7 ms … 633.2 ms 10 runs
Summary
./ruby --disable-gems -e'i = 0; while i < 10_000_000; Hash.new(capacity: 0); i += 1; end' ran
1.72 ± 0.01 times faster than ruby --disable-gems -e'i = 0; while i < 10_000_000; Hash.new(capacity: 0); i += 1; end'
```
This commit changes the backtrace for `initialize`:
```
aaron@tc ~/g/ruby (inline-new)> cat test.rb
class Foo
def initialize
puts caller
end
end
def hello
Foo.new
end
hello
aaron@tc ~/g/ruby (inline-new)> ruby -v test.rb
ruby 3.4.2 (2025-02-15 revision d2930f8e7a) +PRISM [arm64-darwin24]
test.rb:8:in 'Class#new'
test.rb:8:in 'Object#hello'
test.rb:11:in '<main>'
aaron@tc ~/g/ruby (inline-new)> ./miniruby -v test.rb
ruby 3.5.0dev (2025-03-28T23:59:40Z inline-new c4157884e4) +PRISM [arm64-darwin24]
test.rb:8:in 'Object#hello'
test.rb:11:in '<main>'
```
It also increases memory usage for calls to `new` by 122 bytes:
```
aaron@tc ~/g/ruby (inline-new)> cat test.rb
require "objspace"
class Foo
def initialize
puts caller
end
end
def hello
Foo.new
end
puts ObjectSpace.memsize_of(RubyVM::InstructionSequence.of(method(:hello)))
aaron@tc ~/g/ruby (inline-new)> make runruby
RUBY_ON_BUG='gdb -x ./.gdbinit -p' ./miniruby -I./lib -I. -I.ext/common ./tool/runruby.rb --extout=.ext -- --disable-gems ./test.rb
656
aaron@tc ~/g/ruby (inline-new)> ruby -v test.rb
ruby 3.4.2 (2025-02-15 revision d2930f8e7a) +PRISM [arm64-darwin24]
544
```
Thanks to @ko1 for coming up with this idea!
Co-Authored-By: John Hawthorn <john@hawthorn.email>
Add missing counters to rb_debug_counter_type enum
On master we have calls to the RB_DEBUG_COUNTER_INC macro
for counters that are not getting defined in the
rb_debug_counter_type enum.
This commit adds those that are missing in order for
compilation to pass with -DUSE_RUBY_DEBUG_LOG.
When an object becomes "too complex" (in other words it has too many
variations in the shape tree), we transition it to use a "too complex"
shape and use a hash for storing instance variables.
Without this patch, there were rare cases where shape tree growth could
"explode" and cause performance degradation on what would otherwise have
been cached fast paths.
This patch puts a limit on shape tree growth, and gracefully degrades in
the rare case where there could be a factorial growth in the shape tree.
For example:
```ruby
class NG; end
HUGE_NUMBER.times do
NG.new.instance_variable_set(:"@unique_ivar_#{_1}", 1)
end
```
We consider objects to be "too complex" when the object's class has more
than SHAPE_MAX_VARIATIONS (currently 8) leaf nodes in the shape tree and
the object introduces a new variation (a new leaf node) associated with
that class.
For example, new variations on instances of the following class would be
considered "too complex" because those instances create more than 8
leaves in the shape tree:
```ruby
class Foo; end
9.times { Foo.new.instance_variable_set(":@uniq_#{_1}", 1) }
```
However, the following class is *not* too complex because it only has
one leaf in the shape tree:
```ruby
class Foo
def initialize
@a = @b = @c = @d = @e = @f = @g = @h = @i = nil
end
end
9.times { Foo.new }
``
This case is rare, so we don't expect this change to impact performance
of most applications, but it needs to be handled.
Co-Authored-By: Aaron Patterson <tenderlove@ruby-lang.org>
The structure and readability of jit_exec is messed up right now. I'd
like to help the current situation by this for now. I'll resurrect
them when I need it again.
Object Shapes is used for accessing instance variables and representing the
"frozenness" of objects. Object instances have a "shape" and the shape
represents some attributes of the object (currently which instance variables are
set and the "frozenness"). Shapes form a tree data structure, and when a new
instance variable is set on an object, that object "transitions" to a new shape
in the shape tree. Each shape has an ID that is used for caching. The shape
structure is independent of class, so objects of different types can have the
same shape.
For example:
```ruby
class Foo
def initialize
# Starts with shape id 0
@a = 1 # transitions to shape id 1
@b = 1 # transitions to shape id 2
end
end
class Bar
def initialize
# Starts with shape id 0
@a = 1 # transitions to shape id 1
@b = 1 # transitions to shape id 2
end
end
foo = Foo.new # `foo` has shape id 2
bar = Bar.new # `bar` has shape id 2
```
Both `foo` and `bar` instances have the same shape because they both set
instance variables of the same name in the same order.
This technique can help to improve inline cache hits as well as generate more
efficient machine code in JIT compilers.
This commit also adds some methods for debugging shapes on objects. See
`RubyVM::Shape` for more details.
For more context on Object Shapes, see [Feature: #18776]
Co-Authored-By: Aaron Patterson <tenderlove@ruby-lang.org>
Co-Authored-By: Eileen M. Uchitelle <eileencodes@gmail.com>
Co-Authored-By: John Hawthorn <john@hawthorn.email>
Object Shapes is used for accessing instance variables and representing the
"frozenness" of objects. Object instances have a "shape" and the shape
represents some attributes of the object (currently which instance variables are
set and the "frozenness"). Shapes form a tree data structure, and when a new
instance variable is set on an object, that object "transitions" to a new shape
in the shape tree. Each shape has an ID that is used for caching. The shape
structure is independent of class, so objects of different types can have the
same shape.
For example:
```ruby
class Foo
def initialize
# Starts with shape id 0
@a = 1 # transitions to shape id 1
@b = 1 # transitions to shape id 2
end
end
class Bar
def initialize
# Starts with shape id 0
@a = 1 # transitions to shape id 1
@b = 1 # transitions to shape id 2
end
end
foo = Foo.new # `foo` has shape id 2
bar = Bar.new # `bar` has shape id 2
```
Both `foo` and `bar` instances have the same shape because they both set
instance variables of the same name in the same order.
This technique can help to improve inline cache hits as well as generate more
efficient machine code in JIT compilers.
This commit also adds some methods for debugging shapes on objects. See
`RubyVM::Shape` for more details.
For more context on Object Shapes, see [Feature: #18776]
Co-Authored-By: Aaron Patterson <tenderlove@ruby-lang.org>
Co-Authored-By: Eileen M. Uchitelle <eileencodes@gmail.com>
Co-Authored-By: John Hawthorn <john@hawthorn.email>
Redo of 34a2acdac7 and
931138b006 which were reverted.
GitHub PR #4340.
This change implements a cache for class variables. Previously there was
no cache for cvars. Cvar access is slow due to needing to travel all the
way up th ancestor tree before returning the cvar value. The deeper the
ancestor tree the slower cvar access will be.
The benefits of the cache are more visible with a higher number of
included modules due to the way Ruby looks up class variables. The
benchmark here includes 26 modules and shows with the cache, this branch
is 6.5x faster when accessing class variables.
```
compare-ruby: ruby 3.1.0dev (2021-03-15T06:22:34Z master 9e5105c) [x86_64-darwin19]
built-ruby: ruby 3.1.0dev (2021-03-15T12:12:44Z add-cache-for-clas.. c6be009) [x86_64-darwin19]
| |compare-ruby|built-ruby|
|:--------|-----------:|---------:|
|vm_cvar | 5.681M| 36.980M|
| | -| 6.51x|
```
Benchmark.ips calling `ActiveRecord::Base.logger` from within a Rails
application. ActiveRecord::Base.logger has 71 ancestors. The more
ancestors a tree has, the more clear the speed increase. IE if Base had
only one ancestor we'd see no improvement. This benchmark is run on a
vanilla Rails application.
Benchmark code:
```ruby
require "benchmark/ips"
require_relative "config/environment"
Benchmark.ips do |x|
x.report "logger" do
ActiveRecord::Base.logger
end
end
```
Ruby 3.0 master / Rails 6.1:
```
Warming up --------------------------------------
logger 155.251k i/100ms
Calculating -------------------------------------
```
Ruby 3.0 with cvar cache / Rails 6.1:
```
Warming up --------------------------------------
logger 1.546M i/100ms
Calculating -------------------------------------
logger 14.857M (± 4.8%) i/s - 74.198M in 5.006202s
```
Lastly we ran a benchmark to demonstate the difference between master
and our cache when the number of modules increases. This benchmark
measures 1 ancestor, 30 ancestors, and 100 ancestors.
Ruby 3.0 master:
```
Warming up --------------------------------------
1 module 1.231M i/100ms
30 modules 432.020k i/100ms
100 modules 145.399k i/100ms
Calculating -------------------------------------
1 module 12.210M (± 2.1%) i/s - 61.553M in 5.043400s
30 modules 4.354M (± 2.7%) i/s - 22.033M in 5.063839s
100 modules 1.434M (± 2.9%) i/s - 7.270M in 5.072531s
Comparison:
1 module: 12209958.3 i/s
30 modules: 4354217.8 i/s - 2.80x (± 0.00) slower
100 modules: 1434447.3 i/s - 8.51x (± 0.00) slower
```
Ruby 3.0 with cvar cache:
```
Warming up --------------------------------------
1 module 1.641M i/100ms
30 modules 1.655M i/100ms
100 modules 1.620M i/100ms
Calculating -------------------------------------
1 module 16.279M (± 3.8%) i/s - 82.038M in 5.046923s
30 modules 15.891M (± 3.9%) i/s - 79.459M in 5.007958s
100 modules 16.087M (± 3.6%) i/s - 81.005M in 5.041931s
Comparison:
1 module: 16279458.0 i/s
100 modules: 16087484.6 i/s - same-ish: difference falls within error
30 modules: 15891406.2 i/s - same-ish: difference falls within error
```
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Instead of on read. Once it's in the inline cache we never have to make
one again. We want to eventually put the value into the cache, and the
best opportunity to do that is when you write the value.
This change implements a cache for class variables. Previously there was
no cache for cvars. Cvar access is slow due to needing to travel all the
way up th ancestor tree before returning the cvar value. The deeper the
ancestor tree the slower cvar access will be.
The benefits of the cache are more visible with a higher number of
included modules due to the way Ruby looks up class variables. The
benchmark here includes 26 modules and shows with the cache, this branch
is 6.5x faster when accessing class variables.
```
compare-ruby: ruby 3.1.0dev (2021-03-15T06:22:34Z master 9e5105ca45) [x86_64-darwin19]
built-ruby: ruby 3.1.0dev (2021-03-15T12:12:44Z add-cache-for-clas.. c6be0093ae) [x86_64-darwin19]
| |compare-ruby|built-ruby|
|:--------|-----------:|---------:|
|vm_cvar | 5.681M| 36.980M|
| | -| 6.51x|
```
Benchmark.ips calling `ActiveRecord::Base.logger` from within a Rails
application. ActiveRecord::Base.logger has 71 ancestors. The more
ancestors a tree has, the more clear the speed increase. IE if Base had
only one ancestor we'd see no improvement. This benchmark is run on a
vanilla Rails application.
Benchmark code:
```ruby
require "benchmark/ips"
require_relative "config/environment"
Benchmark.ips do |x|
x.report "logger" do
ActiveRecord::Base.logger
end
end
```
Ruby 3.0 master / Rails 6.1:
```
Warming up --------------------------------------
logger 155.251k i/100ms
Calculating -------------------------------------
```
Ruby 3.0 with cvar cache / Rails 6.1:
```
Warming up --------------------------------------
logger 1.546M i/100ms
Calculating -------------------------------------
logger 14.857M (± 4.8%) i/s - 74.198M in 5.006202s
```
Lastly we ran a benchmark to demonstate the difference between master
and our cache when the number of modules increases. This benchmark
measures 1 ancestor, 30 ancestors, and 100 ancestors.
Ruby 3.0 master:
```
Warming up --------------------------------------
1 module 1.231M i/100ms
30 modules 432.020k i/100ms
100 modules 145.399k i/100ms
Calculating -------------------------------------
1 module 12.210M (± 2.1%) i/s - 61.553M in 5.043400s
30 modules 4.354M (± 2.7%) i/s - 22.033M in 5.063839s
100 modules 1.434M (± 2.9%) i/s - 7.270M in 5.072531s
Comparison:
1 module: 12209958.3 i/s
30 modules: 4354217.8 i/s - 2.80x (± 0.00) slower
100 modules: 1434447.3 i/s - 8.51x (± 0.00) slower
```
Ruby 3.0 with cvar cache:
```
Warming up --------------------------------------
1 module 1.641M i/100ms
30 modules 1.655M i/100ms
100 modules 1.620M i/100ms
Calculating -------------------------------------
1 module 16.279M (± 3.8%) i/s - 82.038M in 5.046923s
30 modules 15.891M (± 3.9%) i/s - 79.459M in 5.007958s
100 modules 16.087M (± 3.6%) i/s - 81.005M in 5.041931s
Comparison:
1 module: 16279458.0 i/s
100 modules: 16087484.6 i/s - same-ish: difference falls within error
30 modules: 15891406.2 i/s - same-ish: difference falls within error
```
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
rb_funcall* (rb_funcall(), rb_funcallv(), ...) functions invokes
Ruby's method with given receiver. Ruby 2.7 introduced inline method
cache with static memory area. However, Ruby 3.0 reimplemented the
method cache data structures and the inline cache was removed.
Without inline cache, rb_funcall* searched methods everytime.
Most of cases per-Class Method Cache (pCMC) will be helped but
pCMC requires VM-wide locking and it hurts performance on
multi-Ractor execution, especially all Ractors calls methods
with rb_funcall*.
This patch introduced Global Call-Cache Cache Table (gccct) for
rb_funcall*. Call-Cache was introduced from Ruby 3.0 to manage
method cache entry atomically and gccct enables method-caching
without VM-wide locking. This table solves the performance issue
on multi-ractor execution.
[Bug #17497]
Ruby-level method invocation does not use gccct because it has
inline-method-cache and the table size is limited. Basically
rb_funcall* is not used frequently, so 1023 entries can be enough.
We will revisit the table size if it is not enough.
constant cache `IC` is accessed by non-atomic manner and there are
thread-safety issues, so Ruby 3.0 disables to use const cache on
non-main ractors.
This patch enables it by introducing `imemo_constcache` and allocates
it by every re-fill of const cache like `imemo_callcache`.
[Bug #17510]
Now `IC` only has one entry `IC::entry` and it points to
`iseq_inline_constant_cache_entry`, managed by T_IMEMO object.
`IC` is atomic data structure so `rb_mjit_before_vm_ic_update()` and
`rb_mjit_after_vm_ic_update()` is not needed.
add cc_found_in_ccs (renamed from cc_found_ccs), cc_not_found_in_ccs,
call0_public, call0_other debug counters to measure more details.
also it contains several modification.
This commit adds a debug counter for the case where the inline cache
*missed* but the ivar index table has an entry for that ivar. This is a
case where a polymorphic cache could help
This patch contains several ideas:
(1) Disposable inline method cache (IMC) for race-free inline method cache
* Making call-cache (CC) as a RVALUE (GC target object) and allocate new
CC on cache miss.
* This technique allows race-free access from parallel processing
elements like RCU.
(2) Introduce per-Class method cache (pCMC)
* Instead of fixed-size global method cache (GMC), pCMC allows flexible
cache size.
* Caching CCs reduces CC allocation and allow sharing CC's fast-path
between same call-info (CI) call-sites.
(3) Invalidate an inline method cache by invalidating corresponding method
entries (MEs)
* Instead of using class serials, we set "invalidated" flag for method
entry itself to represent cache invalidation.
* Compare with using class serials, the impact of method modification
(add/overwrite/delete) is small.
* Updating class serials invalidate all method caches of the class and
sub-classes.
* Proposed approach only invalidate the method cache of only one ME.
See [Feature #16614] for more details.
