This introduces a new method to encapsulate checking whether the current
Ractor owns the vm->ractor.sync lock. This allows us to disable TSan on
it since that operation should be safe, and still get validation of
other uses.
Fixes [Bug #21201]
This change addresses a performance regression where defining methods
inside `refine` blocks caused severe slowdowns. The issue was due to
`rb_clear_all_refinement_method_cache()` triggering a full object
space scan via `rb_objspace_each_objects` to find and invalidate
affected callcaches, which is very inefficient.
To fix this, I introduce `vm->cc_refinement_table` to track
callcaches related to refinements. This allows us to invalidate
only the necessary callcaches without scanning the entire heap,
resulting in significant performance improvement.
Followup: https://github.com/ruby/ruby/pull/13341 / [Feature #21353]
Even thought `shape_id_t` has been make 32bits, we were still limited
to use only the lower 16 bits because they had to fit alongside `attr_index_t`
inside a `uintptr_t` in inline caches.
By enlarging inline caches we can unlock the full 32bits on all
platforms, allowing to use these extra bits for tagging.
* Added `Ractor::Port`
* `Ractor::Port#receive` (support multi-threads)
* `Rcator::Port#close`
* `Ractor::Port#closed?`
* Added some methods
* `Ractor#join`
* `Ractor#value`
* `Ractor#monitor`
* `Ractor#unmonitor`
* Removed some methods
* `Ractor#take`
* `Ractor.yield`
* Change the spec
* `Racotr.select`
You can wait for multiple sequences of messages with `Ractor::Port`.
```ruby
ports = 3.times.map{ Ractor::Port.new }
ports.map.with_index do |port, ri|
Ractor.new port,ri do |port, ri|
3.times{|i| port << "r#{ri}-#{i}"}
end
end
p ports.each{|port| pp 3.times.map{port.receive}}
```
In this example, we use 3 ports, and 3 Ractors send messages to them respectively.
We can receive a series of messages from each port.
You can use `Ractor#value` to get the last value of a Ractor's block:
```ruby
result = Ractor.new do
heavy_task()
end.value
```
You can wait for the termination of a Ractor with `Ractor#join` like this:
```ruby
Ractor.new do
some_task()
end.join
```
`#value` and `#join` are similar to `Thread#value` and `Thread#join`.
To implement `#join`, `Ractor#monitor` (and `Ractor#unmonitor`) is introduced.
This commit changes `Ractor.select()` method.
It now only accepts ports or Ractors, and returns when a port receives a message or a Ractor terminates.
We removes `Ractor.yield` and `Ractor#take` because:
* `Ractor::Port` supports most of similar use cases in a simpler manner.
* Removing them significantly simplifies the code.
We also change the internal thread scheduler code (thread_pthread.c):
* During barrier synchronization, we keep the `ractor_sched` lock to avoid deadlocks.
This lock is released by `rb_ractor_sched_barrier_end()`
which is called at the end of operations that require the barrier.
* fix potential deadlock issues by checking interrupts just before setting UBF.
https://bugs.ruby-lang.org/issues/21262
Rework ractors so that any ractor action (Ractor.receive, Ractor#send, Ractor.yield, Ractor#take,
Ractor.select) will operate on the thread that called the action. It will put that thread to sleep if
it's a blocking function and it needs to put it to sleep, and the awakening action (Ractor.yield,
Ractor#send) will wake up the blocked thread.
Before this change every blocking ractor action was associated with the ractor struct and its fields.
If a ractor called Ractor.receive, its wait status was wait_receiving, and when another ractor calls
r.send on it, it will look for that status in the ractor struct fields and wake it up. The problem was that
what if 2 threads call blocking ractor actions in the same ractor. Imagine if 1 thread has called Ractor.receive
and another r.take. Then, when a different ractor calls r.send on it, it doesn't know which ruby thread is associated
to which ractor action, so what ruby thread should it schedule? This change moves some fields onto the ruby thread
itself so that ruby threads are the ones that have ractor blocking statuses, and threads are then specifically scheduled
when unblocked.
Fixes [#17624]
Fixes [#21037]
When doing a coroutine transfer from one thread to another, there's a
risk that the compiler will reuse an address from TLS before the
transfer to the new thread.
These VM assertions are all in places we would not otherwise be reading
from TLS, but using the value of `ec` or `cr` passed in. Switching these
to test against rb_current_ec_noinline() instead ensures there isn't an
optimization applied to how we read ruby_current_ec.
Currently it seems we were hitting this on LLVM 18 specifically, but I
don't know of any reason other versions wouldn't have the same issue.
This implements a hash set which is wait-free for lookup and lock-free
for insert (unless resizing) to use for fstring de-duplication.
As highlighted in https://bugs.ruby-lang.org/issues/19288, heavy use of
fstrings (frozen interned strings) can significantly reduce the
parallelism of Ractors.
I tried a few other approaches first: using an RWLock, striping a series
of RWlocks (partitioning the hash N-ways to reduce lock contention), and
putting a cache in front of it. All of these improved the situation, but
were unsatisfying as all still required locks for writes (and granular
locks are awkward, since we run the risk of needing to reach a vm
barrier) and this table is somewhat write-heavy.
My main reference for this was Cliff Click's talk on a lock free
hash-table for java https://www.youtube.com/watch?v=HJ-719EGIts. It
turns out this lock-free hash set is made easier to implement by a few
properties:
* We only need a hash set rather than a hash table (we only need keys,
not values), and so the full entry can be written as a single VALUE
* As a set we only need lookup/insert/delete, no update
* Delete is only run inside GC so does not need to be atomic (It could
be made concurrent)
* I use rb_vm_barrier for the (rare) table rebuilds (It could be made
concurrent) We VM lock (but don't require other threads to stop) for
table rebuilds, as those are rare
* The conservative garbage collector makes deferred replication easy,
using a T_DATA object
Another benefits of having a table specific to fstrings is that we
compare by value on lookup/insert, but by identity on delete, as we only
want to remove the exact string which is being freed. This is faster and
provides a second way to avoid the race condition in
https://bugs.ruby-lang.org/issues/21172.
This is a pretty standard open-addressing hash table with quadratic
probing. Similar to our existing st_table or id_table. Deletes (which
happen on GC) replace existing keys with a tombstone, which is the only
type of update which can occur. Tombstones are only cleared out on
resize.
Unlike st_table, the VALUEs are stored in the hash table itself
(st_table's bins) rather than as a compact index. This avoids an extra
pointer dereference and is possible because we don't need to preserve
insertion order. The table targets a load factor of 2 (it is enlarged
once it is half full).
It looks like stat_insn_usage was introduced with YARV, but as far as I
can tell the field has never been used. I think we should remove the
field since we don't use it.
[Bug #20921]
When we create a cache entry for a constant, the following sequence of
events could happen:
- vm_track_constant_cache is called to insert a constant cache.
- In vm_track_constant_cache, we first look up the ST table for the ID
of the constant. Assume the ST table exists because another iseq also
holds a cache entry for this ID.
- We then insert into this ST table with the iseq_inline_constant_cache.
- However, while inserting into this ST table, it allocates memory, which
could trigger a GC. Assume that it does trigger a GC.
- The GC frees the one and only other iseq that holds a cache entry for
this ID.
- In remove_from_constant_cache, it will appear that the ST table is now
empty because there are no more iseq with cache entries for this ID, so
we free the ST table.
- We complete GC and continue our st_insert. However, this ST table has
been freed so we now have a use-after-free.
This issue is very hard to reproduce, because it requires that the GC runs
at a very specific time. However, we can make it show up by applying this
patch which runs GC right before the st_insert to mimic the st_insert
triggering a GC:
diff --git a/vm_insnhelper.c b/vm_insnhelper.c
index 3cb23f06f0..a93998136a 100644
--- a/vm_insnhelper.c
+++ b/vm_insnhelper.c
@@ -6338,6 +6338,10 @@ vm_track_constant_cache(ID id, void *ic)
rb_id_table_insert(const_cache, id, (VALUE)ics);
}
+ if (id == rb_intern("MyConstant")) rb_gc();
+
st_insert(ics, (st_data_t) ic, (st_data_t) Qtrue);
}
And if we run this script:
Object.const_set("MyConstant", "Hello!")
my_proc = eval("-> { MyConstant }")
my_proc.call
my_proc = eval("-> { MyConstant }")
my_proc.call
We can see that ASAN outputs a use-after-free error:
==36540==ERROR: AddressSanitizer: heap-use-after-free on address 0x606000049528 at pc 0x000102f3ceac bp 0x00016d607a70 sp 0x00016d607a68
READ of size 8 at 0x606000049528 thread T0
#0 0x102f3cea8 in do_hash st.c:321
#1 0x102f3ddd0 in rb_st_insert st.c:1132
#2 0x103140700 in vm_track_constant_cache vm_insnhelper.c:6345
#3 0x1030b91d8 in vm_ic_track_const_chain vm_insnhelper.c:6356
#4 0x1030b8cf8 in rb_vm_opt_getconstant_path vm_insnhelper.c:6424
#5 0x1030bc1e0 in vm_exec_core insns.def:263
#6 0x1030b55fc in rb_vm_exec vm.c:2585
#7 0x1030fe0ac in rb_iseq_eval_main vm.c:2851
#8 0x102a82588 in rb_ec_exec_node eval.c:281
#9 0x102a81fe0 in ruby_run_node eval.c:319
#10 0x1027f3db4 in rb_main main.c:43
#11 0x1027f3bd4 in main main.c:68
#12 0x183900270 (<unknown module>)
0x606000049528 is located 8 bytes inside of 56-byte region [0x606000049520,0x606000049558)
freed by thread T0 here:
#0 0x104174d40 in free+0x98 (libclang_rt.asan_osx_dynamic.dylib:arm64e+0x54d40)
#1 0x102ada89c in rb_gc_impl_free default.c:8183
#2 0x102ada7dc in ruby_sized_xfree gc.c:4507
#3 0x102ac4d34 in ruby_xfree gc.c:4518
#4 0x102f3cb34 in rb_st_free_table st.c:663
#5 0x102bd52d8 in remove_from_constant_cache iseq.c:119
#6 0x102bbe2cc in iseq_clear_ic_references iseq.c:153
#7 0x102bbd2a0 in rb_iseq_free iseq.c:166
#8 0x102b32ed0 in rb_imemo_free imemo.c:564
#9 0x102ac4b44 in rb_gc_obj_free gc.c:1407
#10 0x102af4290 in gc_sweep_plane default.c:3546
#11 0x102af3bdc in gc_sweep_page default.c:3634
#12 0x102aeb140 in gc_sweep_step default.c:3906
#13 0x102aeadf0 in gc_sweep_rest default.c:3978
#14 0x102ae4714 in gc_sweep default.c:4155
#15 0x102af8474 in gc_start default.c:6484
#16 0x102afbe30 in garbage_collect default.c:6363
#17 0x102ad37f0 in rb_gc_impl_start default.c:6816
#18 0x102ad3634 in rb_gc gc.c:3624
#19 0x1031406ec in vm_track_constant_cache vm_insnhelper.c:6342
#20 0x1030b91d8 in vm_ic_track_const_chain vm_insnhelper.c:6356
#21 0x1030b8cf8 in rb_vm_opt_getconstant_path vm_insnhelper.c:6424
#22 0x1030bc1e0 in vm_exec_core insns.def:263
#23 0x1030b55fc in rb_vm_exec vm.c:2585
#24 0x1030fe0ac in rb_iseq_eval_main vm.c:2851
#25 0x102a82588 in rb_ec_exec_node eval.c:281
#26 0x102a81fe0 in ruby_run_node eval.c:319
#27 0x1027f3db4 in rb_main main.c:43
#28 0x1027f3bd4 in main main.c:68
#29 0x183900270 (<unknown module>)
previously allocated by thread T0 here:
#0 0x104174c04 in malloc+0x94 (libclang_rt.asan_osx_dynamic.dylib:arm64e+0x54c04)
#1 0x102ada0ec in rb_gc_impl_malloc default.c:8198
#2 0x102acee44 in ruby_xmalloc gc.c:4438
#3 0x102f3c85c in rb_st_init_table_with_size st.c:571
#4 0x102f3c900 in rb_st_init_table st.c:600
#5 0x102f3c920 in rb_st_init_numtable st.c:608
#6 0x103140698 in vm_track_constant_cache vm_insnhelper.c:6337
#7 0x1030b91d8 in vm_ic_track_const_chain vm_insnhelper.c:6356
#8 0x1030b8cf8 in rb_vm_opt_getconstant_path vm_insnhelper.c:6424
#9 0x1030bc1e0 in vm_exec_core insns.def:263
#10 0x1030b55fc in rb_vm_exec vm.c:2585
#11 0x1030fe0ac in rb_iseq_eval_main vm.c:2851
#12 0x102a82588 in rb_ec_exec_node eval.c:281
#13 0x102a81fe0 in ruby_run_node eval.c:319
#14 0x1027f3db4 in rb_main main.c:43
#15 0x1027f3bd4 in main main.c:68
#16 0x183900270 (<unknown module>)
This commit fixes this bug by adding a inserting_constant_cache_id field
to the VM, which stores the ID that is currently being inserted and, in
remove_from_constant_cache, we don't free the ST table for ID equal to
this one.
Co-Authored-By: Alan Wu <alanwu@ruby-lang.org>
* Add opt_duparray_send insn to skip the allocation on `#include?`
If the method isn't going to modify the array we don't need to copy it.
This avoids the allocation / array copy for things like `[:a, :b].include?(x)`.
This adds a BOP for include? and tracks redefinition for it on Array.
Co-authored-by: Andrew Novoselac <andrew.novoselac@shopify.com>
* YJIT: Implement opt_duparray_send include_p
Co-authored-by: Andrew Novoselac <andrew.novoselac@shopify.com>
* Update opt_newarray_send to support simple forms of include?(arg)
Similar to opt_duparray_send but for non-static arrays.
* YJIT: Implement opt_newarray_send include_p
---------
Co-authored-by: Andrew Novoselac <andrew.novoselac@shopify.com>
Many libraries should be loaded on the main ractor because of
setting constants with unshareable objects and so on.
This patch allows to call `requore` on non-main Ractors by
asking the main ractor to call `require` on it. The calling ractor
waits for the result of `require` from the main ractor.
If the `require` call failed with some reasons, an exception
objects will be deliverred from the main ractor to the calling ractor
if it is copy-able.
Same on `require_relative` and `require` by `autoload`.
Now `Ractor.new{pp obj}` works well (the first call of `pp` requires
`pp` library implicitly).
[Feature #20627]
to show unused block warning strictly.
```ruby
class C
def f = nil
end
class D
def f = yield
end
[C.new, D.new].each{|obj| obj.f{}}
```
In this case, `D#f` accepts a block. However `C#f` doesn't
accept a block. There are some cases passing a block with
`obj.f{}` where `obj` is `C` or `D`. To avoid warnings on
such cases, "unused block warning" will be warned only if
there is not same name which accepts a block.
On the above example, `C.new.f{}` doesn't show any warnings
because there is a same name `D#f` which accepts a block.
We call this default behavior as "relax mode".
`strict_unused_block` new warning category changes from
"relax mode" to "strict mode", we don't check same name
methods and `C.new.f{}` will be warned.
[Feature #15554]
* YJIT: Replace Array#each only when YJIT is enabled
* Add comments about BUILTIN_ATTR_C_TRACE
* Make Ruby Array#each available with --yjit as well
* Fix all paths that expect a C location
* Use method_basic_definition_p to detect patches
* Copy a comment about C_TRACE flag to compilers
* Rephrase a comment about add_yjit_hook
* Give METHOD_ENTRY_BASIC flag to Array#each
* Add --yjit-c-builtin option
* Allow inconsistent source_location in test-spec
* Refactor a check of BUILTIN_ATTR_C_TRACE
* Set METHOD_ENTRY_BASIC without touching vm->running
28a1c4f33e seems to call an improper
ensure clause. [Bug #20655]
Than fixing it properly, I bet it would be much better to simply revert
that commit. It reduces the unneeded complexity. Jumping into a block
called by a C function like Hash#each with callcc is user's fault.
It does not need serious support.
This commit splits gc.c into two files:
- gc.c now only contains code not specific to Ruby GC. This includes
code to mark objects (which the GC implementation may choose not to
use) and wrappers for internal APIs that the implementation may need
to use (e.g. locking the VM).
- gc_impl.c now contains the implementation of Ruby's GC. This includes
marking, sweeping, compaction, and statistics. Most importantly,
gc_impl.c only uses public APIs in Ruby and a limited set of functions
exposed in gc.c. This allows us to build gc_impl.c independently of
Ruby and plug Ruby's GC into itself.
I think this change fixes the following assertion failure:
```
[BUG] unexpected rb_parser_ary_data_type (2114076960) for script lines
```
It seems that `ast_value` is collected then `rb_parser_build_script_lines_from`
touches invalid memory address.
This change prevents `ast_value` from being collected by RB_GC_GUARD.
This commit changes the external GC to be loaded with the `--gc-library`
command line argument instead of the RUBY_GC_LIBRARY_PATH environment
variable because @nobu pointed out that loading binaries using environment
variables can pose a security risk.
This patch optimizes forwarding callers and callees. It only optimizes methods that only take `...` as their parameter, and then pass `...` to other calls.
Calls it optimizes look like this:
```ruby
def bar(a) = a
def foo(...) = bar(...) # optimized
foo(123)
```
```ruby
def bar(a) = a
def foo(...) = bar(1, 2, ...) # optimized
foo(123)
```
```ruby
def bar(*a) = a
def foo(...)
list = [1, 2]
bar(*list, ...) # optimized
end
foo(123)
```
All variants of the above but using `super` are also optimized, including a bare super like this:
```ruby
def foo(...)
super
end
```
This patch eliminates intermediate allocations made when calling methods that accept `...`.
We can observe allocation elimination like this:
```ruby
def m
x = GC.stat(:total_allocated_objects)
yield
GC.stat(:total_allocated_objects) - x
end
def bar(a) = a
def foo(...) = bar(...)
def test
m { foo(123) }
end
test
p test # allocates 1 object on master, but 0 objects with this patch
```
```ruby
def bar(a, b:) = a + b
def foo(...) = bar(...)
def test
m { foo(1, b: 2) }
end
test
p test # allocates 2 objects on master, but 0 objects with this patch
```
How does it work?
-----------------
This patch works by using a dynamic stack size when passing forwarded parameters to callees.
The caller's info object (known as the "CI") contains the stack size of the
parameters, so we pass the CI object itself as a parameter to the callee.
When forwarding parameters, the forwarding ISeq uses the caller's CI to determine how much stack to copy, then copies the caller's stack before calling the callee.
The CI at the forwarded call site is adjusted using information from the caller's CI.
I think this description is kind of confusing, so let's walk through an example with code.
```ruby
def delegatee(a, b) = a + b
def delegator(...)
delegatee(...) # CI2 (FORWARDING)
end
def caller
delegator(1, 2) # CI1 (argc: 2)
end
```
Before we call the delegator method, the stack looks like this:
```
Executing Line | Code | Stack
---------------+---------------------------------------+--------
1| def delegatee(a, b) = a + b | self
2| | 1
3| def delegator(...) | 2
4| # |
5| delegatee(...) # CI2 (FORWARDING) |
6| end |
7| |
8| def caller |
-> 9| delegator(1, 2) # CI1 (argc: 2) |
10| end |
```
The ISeq for `delegator` is tagged as "forwardable", so when `caller` calls in
to `delegator`, it writes `CI1` on to the stack as a local variable for the
`delegator` method. The `delegator` method has a special local called `...`
that holds the caller's CI object.
Here is the ISeq disasm fo `delegator`:
```
== disasm: #<ISeq:delegator@-e:1 (1,0)-(1,39)>
local table (size: 1, argc: 0 [opts: 0, rest: -1, post: 0, block: -1, kw: -1@-1, kwrest: -1])
[ 1] "..."@0
0000 putself ( 1)[LiCa]
0001 getlocal_WC_0 "..."@0
0003 send <calldata!mid:delegatee, argc:0, FCALL|FORWARDING>, nil
0006 leave [Re]
```
The local called `...` will contain the caller's CI: CI1.
Here is the stack when we enter `delegator`:
```
Executing Line | Code | Stack
---------------+---------------------------------------+--------
1| def delegatee(a, b) = a + b | self
2| | 1
3| def delegator(...) | 2
-> 4| # | CI1 (argc: 2)
5| delegatee(...) # CI2 (FORWARDING) | cref_or_me
6| end | specval
7| | type
8| def caller |
9| delegator(1, 2) # CI1 (argc: 2) |
10| end |
```
The CI at `delegatee` on line 5 is tagged as "FORWARDING", so it knows to
memcopy the caller's stack before calling `delegatee`. In this case, it will
memcopy self, 1, and 2 to the stack before calling `delegatee`. It knows how much
memory to copy from the caller because `CI1` contains stack size information
(argc: 2).
Before executing the `send` instruction, we push `...` on the stack. The
`send` instruction pops `...`, and because it is tagged with `FORWARDING`, it
knows to memcopy (using the information in the CI it just popped):
```
== disasm: #<ISeq:delegator@-e:1 (1,0)-(1,39)>
local table (size: 1, argc: 0 [opts: 0, rest: -1, post: 0, block: -1, kw: -1@-1, kwrest: -1])
[ 1] "..."@0
0000 putself ( 1)[LiCa]
0001 getlocal_WC_0 "..."@0
0003 send <calldata!mid:delegatee, argc:0, FCALL|FORWARDING>, nil
0006 leave [Re]
```
Instruction 001 puts the caller's CI on the stack. `send` is tagged with
FORWARDING, so it reads the CI and _copies_ the callers stack to this stack:
```
Executing Line | Code | Stack
---------------+---------------------------------------+--------
1| def delegatee(a, b) = a + b | self
2| | 1
3| def delegator(...) | 2
4| # | CI1 (argc: 2)
-> 5| delegatee(...) # CI2 (FORWARDING) | cref_or_me
6| end | specval
7| | type
8| def caller | self
9| delegator(1, 2) # CI1 (argc: 2) | 1
10| end | 2
```
The "FORWARDING" call site combines information from CI1 with CI2 in order
to support passing other values in addition to the `...` value, as well as
perfectly forward splat args, kwargs, etc.
Since we're able to copy the stack from `caller` in to `delegator`'s stack, we
can avoid allocating objects.
I want to do this to eliminate object allocations for delegate methods.
My long term goal is to implement `Class#new` in Ruby and it uses `...`.
I was able to implement `Class#new` in Ruby
[here](https://github.com/ruby/ruby/pull/9289).
If we adopt the technique in this patch, then we can optimize allocating
objects that take keyword parameters for `initialize`.
For example, this code will allocate 2 objects: one for `SomeObject`, and one
for the kwargs:
```ruby
SomeObject.new(foo: 1)
```
If we combine this technique, plus implement `Class#new` in Ruby, then we can
reduce allocations for this common operation.
Co-Authored-By: John Hawthorn <john@hawthorn.email>
Co-Authored-By: Alan Wu <XrXr@users.noreply.github.com>
This patch removes the `VALUE flags` member from the `rb_ast_t` structure making `rb_ast_t` no longer an IMEMO object.
## Background
We are trying to make the Ruby parser generated from parse.y a universal parser that can be used by other implementations such as mruby.
To achieve this, it is necessary to exclude VALUE and IMEMO from parse.y, AST, and NODE.
## Summary (file by file)
- `rubyparser.h`
- Remove the `VALUE flags` member from `rb_ast_t`
- `ruby_parser.c` and `internal/ruby_parser.h`
- Use TypedData_Make_Struct VALUE which wraps `rb_ast_t` `in ast_alloc()` so that GC can manage it
- You can retrieve `rb_ast_t` from the VALUE by `rb_ruby_ast_data_get()`
- Change the return type of `rb_parser_compile_XXXX()` functions from `rb_ast_t *` to `VALUE`
- rb_ruby_ast_new() which internally `calls ast_alloc()` is to create VALUE vast outside ruby_parser.c
- `iseq.c` and `vm_core.h`
- Amend the first parameter of `rb_iseq_new_XXXX()` functions from `rb_ast_body_t *` to `VALUE`
- This keeps the VALUE of AST on the machine stack to prevent being removed by GC
- `ast.c`
- Almost all change is replacement `rb_ast_t *ast` with `VALUE vast` (sorry for the big diff)
- Fix `node_memsize()`
- Now it includes `rb_ast_local_table_link`, `tokens` and script_lines
- `compile.c`, `load.c`, `node.c`, `parse.y`, `proc.c`, `ruby.c`, `template/prelude.c.tmpl`, `vm.c` and `vm_eval.c`
- Follow-up due to the above changes
- `imemo.{c|h}`
- If an object with `imemo_ast` appears, considers it a bug
Co-authored-by: Nobuyoshi Nakada <nobu@ruby-lang.org>
`RUBY_TRY_UNUSED_BLOCK_WARNING_STRICT=1 ruby ...` will enable
strict check for unused block warning.
This option is only for trial to compare the results so the
envname is not considered well.
Should be removed before Ruby 3.4.0 release.
if a method `foo` uses a block, other (unrelated) method `foo`
can receives a block. So try to relax the unused block warning
condition.
```ruby
class C0
def f = yield
end
class C1 < C0
def f = nil
end
[C0, C1].f{ block } # do not warn
```
This patch is part of universal parser work.
## Summary
- Decouple VALUE from members below:
- `(struct parser_params *)->debug_lines`
- `(rb_ast_t *)->body.script_lines`
- Instead, they are now `rb_parser_ary_t *`
- They can also be a `(VALUE)FIXNUM` as before to hold line count
- `ISEQ_BODY(iseq)->variable.script_lines` remains VALUE
- In order to do this,
- Add `VALUE script_lines` param to `rb_iseq_new_with_opt()`
- Introduce `rb_parser_build_script_lines_from()` to convert `rb_parser_ary_t *` into `VALUE`
## Other details
- Extend `rb_parser_ary_t *`. It previously could only store `rb_parser_ast_token *`, now can store script_lines, too
- Change tactics of building the top-level `SCRIPT_LINES__` in `yycompile0()`
- Before: While parsing, each line of the script is added to `SCRIPT_LINES__[path]`
- After: After `yyparse(p)`, `SCRIPT_LINES__[path]` will be built from `p->debug_lines`
- Remove the second parameter of `rb_parser_set_script_lines()` to make it simple
- Introduce `script_lines_free()` to be called from `rb_ast_free()` because the GC no longer takes care of the script_lines
- Introduce `rb_parser_string_deep_copy()` in parse.y to maintain script_lines when `rb_ruby_parser_free()` called
- With regard to this, please see *Future tasks* below
## Future tasks
- Decouple IMEMO from `rb_ast_t *`
- This lifts the five-members-restriction of Ruby object,
- So we will be able to move the ownership of the `lex.string_buffer` from parser to AST
- Then we remove `rb_parser_string_deep_copy()` to make the whole thing simple
