This change introduces get_insn_info_binary_search, which is (should be)
equivalent to the old get_insn_info.
The old get_insn_info is renamed to get_insn_info_linear_search. When
VM_CHECK_MODE > 0, the equivalence is validated at finish_iseq_build.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61353 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
2.5's line coverage measurement was about two times slower than 2.4
because of two reasons; (1) vm_trace uses rb_iseq_event_flags (which
takes O(n) currently where n is the length of iseq) to get an event
type, and (2) RUBY_EVENT_LINE uses setjmp to call an event hook.
This change adds a special event for line coverage,
RUBY_EVENT_COVERAGE_LINE, and adds `tracecoverage` instructions where
the event occurs in iseq.
`tracecoverage` instruction calls an event hook without vm_trace.
And, RUBY_EVENT_COVERAGE_LINE is an internal event which does not
use setjmp.
This change also cancells lineno change due to the deletion of trace
instructions [Feature #14104]. So fixes [Bug #14191].
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61350 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Before this change, coverage.so had failed to measure some multiple-line
code fragments. This is because removing trace instructions (#14104)
changed TracePoint's lineno (new lineno), and coverage counter array was
based on old lineno.
This change initializes coverage counter array based on new lineno.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61313 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm.c: introduce `ruby_vm_event_enabled_flags` which represents which
event flags are enabled before.
* vm_trace.c: do not turn off `trace_` prefix instructions because turn on
overhead is a matter if a program repeats turn on and turn off frequently.
* iseq.c (finish_iseq_build): respect `ruby_vm_event_enabled_flags`.
* vm_insnhelper.c (vm_trace): check `ruby_vm_event_flags` and disable
lazy trace-off technique (do not disable traces).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61122 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This change makes coverage use the general event type RUBY_EVENT_LINE
instead of a special event type RUBY_EVENT_COVERAGE.
Just a refactoring.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61043 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This change makes each ISeq keep NODE's code range. This information is
needed for method coverage.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61025 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (rb_iseq_trace_set): simply return immediately if
ISeq::compile_data is available. Not sure why this state
is allowed, but exception during compile (or `ISeq::load`)
can make such states.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60915 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (rb_iseq_trace_set): at this point ISEQ_USE_COMPILE_DATA
should not be set.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60871 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (rb_iseq_t::aux): add `trace_events` which represents
which events are enabled on this iseq. With this information,
we can skip useless trace-on changes for ISeqs.
* vm_trace.c (RUBY_EVENTS_TRACE_BY_ISEQ): moved to iseq.h and rename it
with ISEQ_TRACE_EVENTS.
* iseq.h: introduce ISEQ_USE_COMPILE_DATA iseq (imemo) flag to represent
COMPILE_DATA is available. In other words, iseq->aux.trace_events is not
available when this flag is set.
* ISEQ_COMPILE_DATA() is changed from a macro.
* ISEQ_COMPILE_DATA_ALLOC() is added.
* ISEQ_COMPILE_DATA_CLEAR() is added.
* iseq.c: use them.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60838 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (rb_iseq_trace_set): remove a wrong assertion.
This assertion checked `insn` is `trace_` prefix instruction
but threaded code `insn` is original code.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60820 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_trace.c (update_global_event_hook): set only when tracing is added.
If tracing was off (event flags are decreased), then ignore them.
Next `trace_` prefix instruction will trace off itself (lazy tracing off).
* vm_insnhelper.c (vm_trace): trace-off for when trace is not needed.
* iseq.c (rb_iseq_trace_set): fix trace-off process (it was never off tracing).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60817 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* tool/instruction.rb: create `trace_` prefix instructions.
* compile.c (ADD_TRACE): do not add `trace` instructions but add
TRACE link elements. TRACE elements will be unified with a next
instruction as instruction information.
* vm_trace.c (update_global_event_hook): modify all ISeqs when
hooks are enabled.
* iseq.c (rb_iseq_trace_set): added to toggle `trace_` instructions.
* vm_insnhelper.c (vm_trace): added.
This function is a body of `trace_` prefix instructions.
* vm_insnhelper.h (JUMP): save PC to a control frame.
* insns.def (trace): removed.
* vm_exec.h (INSN_ENTRY_SIG): add debug output (disabled).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60763 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (rb_iseq_disasm): do not dump repeatedly same iseq which
has been dumped by catch tables.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60735 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (find_line_no): renamed to rb_iseq_line_no().
* vm_backtrace.c (calc_lineno): add a comment why we need to use "pos-1".
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60733 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (rb_insn_operand_intern): show local variable operand
name in unified instructions.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60732 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.h (iseq_line_info_entry): rename to iseq_insn_info_entry.
* vm_core.h (rb_iseq_constant_body): rename field name line_info_table
to insns_info and also from line_info_size to insns_info_size.
* compile.c (INSN): add struct insn_info to contain per insn information.
* compile.c (add_insn_info): added to add new insn_info entry.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60726 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
You can see ARGS_SIMPLE flag as follows:
$ ruby --dump=insns -e itself
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60528 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This re-introduces r60485.
This reverts commit 5a176b75b1.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60488 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
NODEs in AST are no longer objects managed by GC. This change will
remove the restriction imposed by the GC. For example, a NODE can use
more than five words (this is my primary purpose; we want to store the
position data for each NODE, for coverage library), or even a NODE can
have variable length (some kinds of NODEs have unused fields).
To do this, however, we need more work, since Ripper still uses T_NODE
objects managed by the GC.
The life time of NODEs is more obvious than other kinds of objects; they
are created at parsing, and they become disused immediately after
compilation. This change releases all NODEs by a few `xfree`s after
compilation, so performance will be improved a bit. In extreme example,
`eval("x=1;" * 10000000)` runs much faster (40 sec. -> 7.8 sec. on my
machine).
The most important part of this change is `ast_t` struct, which has
three contents: (1) NODE buffer (malloc'ed memory), (2) a reference to
the root NODE, and (3) an array that contains objects that must be
marked during parsing (such as literal objects). Some functions that
had received `NODE*` arguments, must now receive `ast_t*`.
* node.c, node.h: defines `ast_t` struct and related operations.
* gc.c, internal.h: defines `imemo_ast`.
* parse.y: makes `parser_params` struct have a reference to `ast_t`.
Instead of `rb_node_newnode`, use `rb_ast_newnode` to create a NODE.
* iseq.c, load.c, ruby.c, template/prelude.c.tmpl: modifies some
functions to handle `ast_t*` instead of `NODE*`.
* test/ruby/test_gc.rb: ad-hoc fix for a failed test. The test assumes
GC eden is increased at startup by NODE object creation. However,
this change now create no NODE object, so GC eden is not necessarily
increased.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60485 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
to represent execution context [Feature #14038]
* vm_core.h (rb_thread_t): rb_thread_t::ec is now a pointer.
There are many code using `th` to represent execution context
(such as cfp, VM stack and so on). To access `ec`, they need to
use `th->ec->...` (adding one indirection) so that we need to
replace them by passing `ec` instead of `th`.
* vm_core.h (GET_EC()): introduced to access current ec. Also
remove `ruby_current_thread` global variable.
* cont.c (rb_context_t): introduce rb_context_t::thread_ptr instead of
rb_context_t::thread_value.
* cont.c (ec_set_vm_stack): added to update vm_stack explicitly.
* cont.c (ec_switch): added to switch ec explicitly.
* cont.c (rb_fiber_close): added to terminate fibers explicitly.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60440 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* array.c (rb_to_array_type): make public to share common code
internally.
* hash.c (rb_to_hash_type): make public to share common code
internally.
* symbol.c (rb_to_symbol_type): make public to share common code
internally.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60438 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (rb_iseq_disasm_insn): Remove a meaningless
local variable assignment. `insn` is never changed
in this function, so a result of `insn_op_types(insn)`
is also never changed.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59629 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h: rename absolute_path to realpath because it is expected name.
external APIs (#absolute_path methods) are remained.
* vm_core.h: remove rb_iseq_location_struct::path and
rb_iseq_location_struct::absolute_path and introduce pathobj.
if given path equals to given absolute_path (and most of case
it is true), pathobj is simply given path String. If it is not same,
pathobj is Array and pathobj[0] is path and pathobj[1] is realpath.
This size optimization reduce 8 bytes and
sizeof(struct rb_iseq_constant_body) is 200 bytes -> 192 bytes
on 64bit CPU.
To support this change, the following functions are introduced:
* pathobj_path() (defined in vm_core.h)
* pathobj_realpath() (ditto)
* rb_iseq_path() (decl. in vm_core.h)
* rb_iseq_realpath() (ditto)
* rb_iseq_pathobj_new() (ditto)
* rb_iseq_pathobj_set() (ditto)
* vm_core.h (rb_binding_t): use pathobj instead of path. If binding
is given at eval methods, realpath (absolute_path) was caller's
realpath. However, they should use binding's realpath.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58979 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
To convert the object implicitly, it has had two parts in convert_type() which are
1. lookink up the method's id
2. calling the method
Seems that strncmp() and strcmp() in convert_type() are slightly heavy to look up
the method's id for type conversion.
This patch will add and use internal APIs (rb_convert_type_with_id, rb_check_convert_type_with_id)
to call the method without looking up the method's id when convert the object.
Array#flatten -> 19 % up
Array#+ -> 3 % up
[ruby-dev:50024] [Bug #13341] [Fix GH-1537]
### Before
Array#flatten 104.119k (± 1.1%) i/s - 525.690k in 5.049517s
Array#+ 1.993M (± 1.8%) i/s - 10.010M in 5.024258s
### After
Array#flatten 124.005k (± 1.0%) i/s - 624.240k in 5.034477s
Array#+ 2.058M (± 4.8%) i/s - 10.302M in 5.019328s
### Test Code
require 'benchmark/ips'
class Foo
def to_ary
[1,2,3]
end
end
Benchmark.ips do |x|
ary = []
100.times { |i| ary << i }
array = [ary]
x.report "Array#flatten" do |i|
i.times { array.flatten }
end
x.report "Array#+" do |i|
obj = Foo.new
i.times { array + obj }
end
end
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58978 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (append_compile_error): set Qtrue for erred state with
showing the message immediately.
* iseq.c (prepare_iseq_build): make immediate message mode if main
or top level context, not to show the failed path twice in the
first line.
* iseq.c (cleanup_iseq_build): raise default message exception if
immediate message mode.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@57313 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (iseqw_s_compile_file): deal with syntax error as well as
compile, and should not abort when rescued.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@56268 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Use PRIuSIZE instead of PRIdSIZE. This fixes the exception message shown
on too large xmalloc2. This commit also fixes other incorrect use of
PRIdSIZE in other functions; though most of them are debug print.
* gc.c (heap_extend_pages, get_envparam_size, ruby_malloc_size_overflow,
gc_profile_dump_on): Use PRIuSIZE instead of PRIdSIZE as the passed
value is size_t, not ssize_t.
* iseq.c (get_line_info, rb_iseq_disasm_insn): Ditto.
* sprintf.c (rb_str_format): Ditto.
* thread_win32.c (native_thread_create): Ditto.
* vm.c (get_param): Ditto.
* ext/objspace/objspace_dump.c (dump_append_string_content,
dump_object): Ditto.
* ext/socket/raddrinfo.c (host_str, port_str): Ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@56156 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (Init_ISeq): undefine allocator of InstructionSequence,
to get rid of segfaults at method call on uninitialized object.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55981 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
and VM_FRAME_CFRAME_P().
Most of case, RUBY_VM_NORMAL_ISEQ_P() is no
longer needed.
* vm_core.h: introduce rb_obj_is_iseq().
* cont.c, vm.c: VM_FRAME_MAGIC_DUMMY with
VM_FRAME_FLAG_CFRAME.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55804 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* *.c: rename rb_funcall2 to rb_funcallv, except for extensions
which are/will be/may be gems. [Fix GH-1406]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55773 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
[Bug #12628]
This patch introduce many changes.
* Introduce concept of "Block Handler (BH)" to represent
passed blocks.
* move rb_control_frame_t::flag to ep[0] (as a special local
variable). This flags represents not only frame type, but also
env flags such as escaped.
* rename `rb_block_t` to `struct rb_block`.
* Make Proc, Binding and RubyVM::Env objects wb-protected.
Check [Bug #12628] for more details.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55766 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
to prevent calling super classes' methods.
Without this patch, you can write workaround like:
class << RubyVM::InstructionSequence
def translate; end
undef translate
end
* test/ruby/test_iseq.rb: add a test.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55656 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
instead of st_table.
* iseq.c (prepare_iseq_build): don't allocate ivar_cache_table
until it has at least one element.
* iseq.c (compile_data_free): free ivar_cache_table only if it
is allocated.
* compile.c (get_ivar_ic_value): allocate if the table is not
allocated yet.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55002 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
instance variable accesses. Reducing memory consumption,
rasing cache hit rate and rasing branch prediction hit rate
are expected. A part of [Bug #12274].
* iseq.h (struct iseq_compile_data): introduce instance
variable IC table for sharing.
* iseq.c (prepare_iseq_build, compile_data_free):
construct/destruct above table.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54976 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* error.c (rb_compile_err_append): rb_thread_t::base_block is no
longer used.
* iseq.c (rb_iseq_compile_with_option): ditto, no protection is
needed.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54345 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
