Because the name "code_range" is ambiguous with encoding's.
Abbreviations ("crange", and "cr") are also renamed to "loc".
The traditional "code_location" (a pair of lineno and column) is
renamed to "code_position". Abbreviations are also renamed
(first_loc to beg_pos, and last_loc to end_pos).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61721 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This change removes tracecoverage instructions on a line that has any
NODE but is non-significant, such as, just one literal.
This fixes the following failure that occurs only when coverage is
enabled:
1) Failure:
TestISeq#test_to_a_lines [.../ruby/test/ruby/test_iseq.rb:56]:
<[3, 4, 7, 9]> expected but was
<[3, 4, 5, 6, 7, 8, 9]>.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61711 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* insns.def (getblockparamproxy): introduce new instruction to return
the `rb_block_param_proxy` object if possible. This object responds
to `call` method and invoke given block (completely similar to `yield`).
* method.h (OPTIMIZED_METHOD_TYPE_BLOCK_CALL): add new optimized call type
which is for `rb_block_param_proxy.cal`.
* vm_insnhelper.c (vm_call_method_each_type): ditto.
* vm_insnhelper.c (vm_call_opt_block_call): ditto.
* vm_core.h (BOP_CALL, PROC_REDEFINED_OP_FLAG): add check for `Proc#call`
redefinition.
* compile.c (iseq_compile_each0): compile to use new insn
`getblockparamproxy` for method call.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61659 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (iseq_peephole_optimize): fix stack consistency error
from return in loop, by adding extra `pop` when replacing `jump`
with `leave`, which is never reached but needed to adjust sp
calculation. [ruby-core:84589] [Bug #14273]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61618 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
NODE_PRELUDE contains a `BEGIN` node, a main node, and compile_option.
This node is assumed that it must be located immediately under the root
NODE_SCOPE, but this strange assumption is not so good, IMO.
This change removes the assumtion; it integrates the former two nodes by
block_append, and moves compile_option into rb_ast_body_t.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61610 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (iseq_compile_each0): for zsuper (NODE_ZSUPER), we need to check
given argument is Array or not.
* test/ruby/test_super.rb: add a test for this bug.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61603 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This commit removes ISEQ_TYPE_DEFINED_GUARD because it is no longer
needed. And this introduces ISEQ_TYPE_PLAIN which means that the iseq
does nothing special but just wrap an expression. Currently, this is
used for once execution: `/foo#{ bar }baz/o`.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61601 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This commit removes tmp_node trick to create a special exception handler
for `defined?`.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61599 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
It is too error-prone to pass IMEMO_IFUNC object as NODE*.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61592 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (compile_next): label for jump to the end of block is
removable.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61587 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (DECL_ANCHOR): initialize as anchor type, which is not
a valid iseq element.
* compile.c (BADINSN_DUMP): dump from the first element, excluding
the anchor itself.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61584 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (dump_disasm_list_with_cursor): show stack depth for
each label.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61578 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
To be precise C90 says "A bit-field may have type int, unsigned
int, or signed int". It is clear that char or enum are NG.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61554 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This makes TracePoint a bit fast by reducing cache misses of
`get_insn_info_binary_search`.
Also, I plan to use succinct bitvector algorithm for `get_insn_info`
instead of binary search. This change will make it easy.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61536 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This factors rb_iseq_constant_body#insns_info and #insns_info_size to
struct iseq_insn_info.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61534 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (iseq_compile_each): for empty method, block and so on,
`last_line` is not set so that line number of `putnil` instruction
will be zero. This patch set `first_lineno` for such `putnil`.
Problem is reported by deivid-rodriguez via Yuichiro Kaneko.
* test/ruby/test_iseq.rb: add a test for this spec.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61457 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (compile_return): evaluate arguments to top-level
return but ignore the results.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61437 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (iseqw_trace_points): add `RubyVM::InstructionSequence#trace_points`
method for tools which want to manipulate ISeq (and traces).
* test/ruby/test_iseq.rb: add a test for this method.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61427 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (rb_iseq_compile_node): line number spec of :return, :b_return
and :end events of 'TracePoint` is changed for [Feature #14104].
Quoted from [Feature #14104]:
> Line numbers on :return/:b_return events show the last executed lines,
> instead of end lines (without return statement).
Note that :end event also affected.
However, "buybug", a well-known ruby debugger depends on previous behavior
so that I reverted this specification.
* test/ruby/test_settracefunc.rb: catch up this fix.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61424 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (compile_branch_condition): replace block param value
in branch conditions with `defined(yield)`, to get rid of
creating proc value.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61371 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
2.5's line coverage measurement was about two times slower than 2.4
because of two reasons; (1) vm_trace uses rb_iseq_event_flags (which
takes O(n) currently where n is the length of iseq) to get an event
type, and (2) RUBY_EVENT_LINE uses setjmp to call an event hook.
This change adds a special event for line coverage,
RUBY_EVENT_COVERAGE_LINE, and adds `tracecoverage` instructions where
the event occurs in iseq.
`tracecoverage` instruction calls an event hook without vm_trace.
And, RUBY_EVENT_COVERAGE_LINE is an internal event which does not
use setjmp.
This change also cancells lineno change due to the deletion of trace
instructions [Feature #14104]. So fixes [Bug #14191].
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61350 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (compile_array): pop splat result without creating a
new hash if the whole hash is popped.
[ruby-core:84340] [Bug #14201]
From: Nobuyoshi Nakada <nobu@ruby-lang.org>
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61331 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (compile_array): splat which may have side effects
should be compiled even if the result will be popped.
[ruby-core:84340] [Bug #14201]
From: Nobuyoshi Nakada <nobu@ruby-lang.org>
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61329 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Before this change, coverage.so had failed to measure some multiple-line
code fragments. This is because removing trace instructions (#14104)
changed TracePoint's lineno (new lineno), and coverage counter array was
based on old lineno.
This change initializes coverage counter array based on new lineno.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61313 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This change moves RUBY_EVENT_COVERAGE from include/ruby/ruby.h to
vm_core.h and renames it to RUBY_EVENT_COVERAGE_BRANCH.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61049 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Now this function only deals with branch events, so this change renames
it and remove complexity that is no longer needed.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61046 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This change makes coverage use the general event type RUBY_EVENT_LINE
instead of a special event type RUBY_EVENT_COVERAGE.
Just a refactoring.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61043 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This change makes each ISeq keep NODE's code range. This information is
needed for method coverage.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61025 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Traditionally, method coverage measurement was implemented by inserting
`trace2` instruction to the head of method iseq. So, it just measured
methods defined by `def` keyword.
This commit drastically changes the measuring mechanism of method
coverage; at `RUBY_EVENT_CALL`, it keeps a hash from rb_method_entry_t*
to runs (i.e., it counts the runs per method entry), and at
`Coverage.result`, it creates the result hash by enumerating all
`rb_method_entry_t*` objects (by `ObjectSpace.each_object`).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61023 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (rb_iseq_t::aux): add `trace_events` which represents
which events are enabled on this iseq. With this information,
we can skip useless trace-on changes for ISeqs.
* vm_trace.c (RUBY_EVENTS_TRACE_BY_ISEQ): moved to iseq.h and rename it
with ISEQ_TRACE_EVENTS.
* iseq.h: introduce ISEQ_USE_COMPILE_DATA iseq (imemo) flag to represent
COMPILE_DATA is available. In other words, iseq->aux.trace_events is not
available when this flag is set.
* ISEQ_COMPILE_DATA() is changed from a macro.
* ISEQ_COMPILE_DATA_ALLOC() is added.
* ISEQ_COMPILE_DATA_CLEAR() is added.
* iseq.c: use them.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60838 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (DECL_BRANCH_BASE, ADD_TRACE_BRANCH_COVERAGE): Add
a last location to arguments.
* compile.c (compile_if, compile_case, compile_case2, compile_loop, iseq_compile_each0):
Pass a last location to macros.
* ext/coverage/coverage.c (branch_coverage): Add a last location to
a return value.
* test/coverage/test_coverage.rb: Follow-up these changes.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60785 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (iseq_set_sequence): clear kwargs (in ci_entries) memory area.
kwargs ci entries are initialized by compiler. However, sometimes these
initializations are skipped because corresponding calls are eliminated
by some optimizations (for example, `if true` syntax elimnates else code).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60771 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* tool/instruction.rb: create `trace_` prefix instructions.
* compile.c (ADD_TRACE): do not add `trace` instructions but add
TRACE link elements. TRACE elements will be unified with a next
instruction as instruction information.
* vm_trace.c (update_global_event_hook): modify all ISeqs when
hooks are enabled.
* iseq.c (rb_iseq_trace_set): added to toggle `trace_` instructions.
* vm_insnhelper.c (vm_trace): added.
This function is a body of `trace_` prefix instructions.
* vm_insnhelper.h (JUMP): save PC to a control frame.
* insns.def (trace): removed.
* vm_exec.h (INSN_ENTRY_SIG): add debug output (disabled).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60763 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
