Normal sockets respond to `getbyte`, so we should make SSLSocket respond
to `getbyte` as well. This way we can substitute SSLSockets for regular
sockets.
ac1490b7c9
Clean up old version guards in preparation for the upcoming OpenSSL 3.0
support.
OpenSSL 1.0.1 reached its EOL on 2016-12-31. At that time, we decided
to keep 1.0.1 support because many major Linux distributions were still
shipped with 1.0.1. Now, nearly 4 years later, most Linux distributions
are reaching their EOL and it should be safe to assume nobody uses them
anymore. Major ones that were using 1.0.1:
- Ubuntu 14.04 is EOL since 2019-04-30
- RHEL 6 will reach EOL on 2020-11-30
LibreSSL 3.0 and older versions are no longer supported by the LibreSSL
team as of October 2020.
Note that OpenSSL 1.0.2 also reached EOL on 2019-12-31 and 1.1.0 also
did on 2018-08-31.
c055938f4b
LibreSSL 3.2.4 made the certificate verification logic back closer to
pre-3.2.2 one, which is more compatible with OpenSSL.
Part of the fixes added by commit a0e98d48c91f ("Enhance TLS 1.3 support
on LibreSSL 3.2/3.3", 2020-12-03) is required for 3.2.2 and 3.2.3 only
(and ~3.3.1, however 3.3 does not have a stable release yet). Since both
releases are security fix, it should be safe to remove those special
treatment from our test suite.
While we are at it, TestSSL#test_ecdh_curves is split into TLS 1.2 and
TLS 1.3 variants for clarity.
a9954bac22
This defines TLS1_3_VERSION when using LibreSSL 3.2+. LibreSSL 3.2/3.3
doesn't advertise this by default, even though it will use TLS 1.3
in both client and server modes.
Changes between LibreSSL 3.1 and 3.2/3.3 broke a few tests, Defining
TLS1_3_VERSION by itself fixes 1 test failure. A few tests now
fail on LibreSSL 3.2/3.3 unless TLS 1.2 is set as the maximum version,
and this adjusts those tests. The client CA test doesn't work in
LibreSSL 3.2+, so I've marked that as pending.
For the hostname verification, LibreSSL 3.2.2+ has a new stricter
hostname verifier that doesn't like subjectAltName such as
c*.example.com and d.*.example.com, so adjust the related tests.
With these changes, the tests pass on LibreSSL 3.2/3.3.
a0e98d48c9
The underlying API SSL_CTX_set_tmp_ecdh_callback() was removed by
LibreSSL >= 2.6.1 and OpenSSL >= 1.1.0, in other words, it is not
supported by any non-EOL versions of OpenSSL.
The wrapper was initially implemented in Ruby 2.3 and has been
deprecated since Ruby/OpenSSL 2.0 (bundled with Ruby 2.4) with explicit
warning with rb_warn().
ee037e1460
SSLContext's verify_mode expects an SSL_VERIFY_* constant (an integer)
and verify_hostname expects either true or false. However, they are set
to nil after calling OpenSSL::SSL::SSLContext.new, which is surprising.
Set a proper value to them by default: verify_mode is set to
OpenSSL::SSL::VERIFY_NONE and verify_hostname is set to false by
default.
Note that this does not change the default behavior. The certificate
verification was never performed unless verify_mode is set to
OpenSSL::SSL::VERIFY_PEER by a user. The same applies to
verify_hostname.
87d869352c
Add explicit test cases for the behaviors with different verify_mode.
If we made a bug in verify_mode, we would notice it by failures of other
test cases, but there were no dedicated test cases for verify_mode.
1ccdc05662
The current test_client_auth_public_key test case checks that supplying
a PKey containing only public components through client_cert_cb will
cause handshake to fail. While this is a correct behavior as a whole,
the assertions are misleading in the sense that giving a public key is
causing the failure. Actually, the handshake fails because a client
certificate is not supplied at all, as a result of ArgumentError that is
silently ignored.
Rename the test case to test_client_cert_cb_ignore_error and simplify it
to clarify what it is testing.
785b5569fc
Fix test_socket_open_with_local_address_port_context.
Often with MinGW, it seems EACCES is returned on bind when the port
number is unavailable. Ignore it just as we do for EADDRINUSE and
continue searching free port number.
Fixes: 98f8787b4687 ("test/openssl/test_ssl: fix random failure in
SSLSocket.open test", 2020-02-17)
413b15526e
Let's revert the changes for now, as it cannot be included in the 2.2.0
release.
My comment on #257:
> A blocker is OpenSSL::SSL::SSLContext#add_certificate_chain_file. It
> has a pending change and I don't want to include it in an incomplete
> state.
>
> The initial implementation in commit 46e4bdba40c5 was not really
> useful. The issue is described in #305. #309 extended it
> to take the corresponding private key together. However, the new
> implementation was incompatible on Windows and was reverted by #320 to
> the initial one.
>
> (The prerequisite to implement it in) an alternative way is #288, and
> it's still cooking.
This effectively reverts the following commits:
- dacd08937ccd ("ssl: suppress test failure with SSLContext#add_certificate_chain_file", 2020-03-09)
- 46e4bdba40c5 ("Add support for SSL_CTX_use_certificate_chain_file. Fixes #254.", 2019-06-13)
ea925619a9
"test_close_after_socket_close" checks if ssl.close is no-op even after
the wrapped socket is closed. The test itself is fair, but the other
endpoint that is reading the SSL connection may fail with SSLError:
"SSL_read: unexpected eof while reading" in some environments:
60085389 (MinGW)
20200321T034442Z.fail.html.gz
```
1) Failure:
OpenSSL::TestSSL#test_close_after_socket_close [D:/a/ruby/ruby/src/test/openssl/utils.rb:299]:
exceptions on 1 threads:
SSL_read: unexpected eof while reading
```
This changeset rescues and ignores the SSLError in the test.
Import current master (2c43241dc0ed) of ruby/openssl.git.
Below are the commits that were made since the last batch at commit
b99775b163 (ruby/openssl.git commit f49e7110ca1e). Note that some of
them have been applied already.
----------------------------------------------------------------
Benoit Daloze (1):
Remove redundant and ignored workflow file
DBL-Lee (1):
add support for SHA512_256/SHA512_224
Hiroshi SHIBATA (2):
Guard for OpenSSL::PKey::EC::Group::Error with unsupported platforms
Fixed inconsistency directory structure with ruby/ruby repo
Jeremy Evans (2):
Fix keyword argument separation issues in OpenSSL::SSL::SSLSocket#sys{read,write}_nonblock
Remove taint support
Kazuki Yamaguchi (26):
config: support .include directive
random: make OpenSSL::Random.pseudo_bytes alias of .random_bytes
extconf.rb: get rid of -Werror=deprecated-declarations
test/openssl/test_ssl: skip test_fallback_scsv if necessary
ts: simplify OpenSSL::Timestamp::Request#algorithm
History.md: add missing references to GitHub issues
config: deprecate OpenSSL::Config#add_value and #[]=
test/openssl/test_ssl: remove sleep from test_finished_messages
test/openssl/test_ssl: fix random failure in SSLSocket.open test
test/openssl/test_ssl: avoid explicitly-sized private keys
test/openssl/test_ssl: remove commented-out test case
test/openssl/test_ssl: allow kRSA tests to fail
ssl: avoid declarations after statements
engine: revert OpenSSL::Engine.load changes for cloudhsm
engine: remove really outdated static engines
engine: do not check for ENGINE_load_builtin_engines()
engine: fix guards for 'dynamic' and 'cryptodev' engines
lib/openssl.rb: require openssl/version.rb
x509: add error code and verify flags constants
ssl: set verify error code in the case of verify_hostname failure
.github/workflows: merge CI jobs into a single workflow
.github/workflows: test against different OpenSSL versions
.travis.yml: fully migrate to GitHub Actions
ssl: suppress test failure with SSLContext#add_certificate_chain_file
ssl: remove test case test_puts_meta from test_pair
Revert "Use version.rb in gemspec"
MSP-Greg (2):
.travis.yml - remove 2.3/1.0.2, 2.5/1.1.1, head/1.0.2
Use version.rb in gemspec
Samuel Williams (1):
Restore compatibility with older versions of Ruby.
Yusuke Endoh (1):
Make OpenSSL::OSSL#test_memcmp_timing robust
Run the test case only when the OpenSSL supports both TLS 1.1 and TLS
1.2. Note that the fallback SCSV mechanism is for TLS 1.2 or older and
not for 1.3.
Fixes: https://github.com/ruby/openssl/issues/3366f2e6d7cf7
It fails due to "error:140AB18F:SSL routines:SSL_CTX_use_certificate:ee
key too small". This is a tentative measurement to avoid the failure.
20200216T093010Z.fail.html.gz
test/openssl/fixture/chain/server.key should be longer.
It should be documented how to create the files.
BTW, it would be a good idea to dynamically create a key during test
instead of fixed files.
It's unlikely anyone would actually hit these. The methods are
private, you only hit this code path if calling these methods
before performing the SSL connection, and there is already a
verbose warning issued.
Sync with the current tip of master branch, 62436385306c of
ruby/openssl.git. Changes can be found at:
https://github.com/ruby/openssl/compare/v2.1.1...62436385306c
----------------------------------------------------------------
Brian Cunnie (1):
Correctly verify abbreviated IPv6 SANs
Janko Marohnić (1):
Reduce memory allocation when writing to SSLSocket
Jeremy Evans (1):
Move rb_global_variable call to directly after assignment
Kazuki Yamaguchi (7):
pkcs7: allow recipient's certificate to be omitted for PKCS7#decrypt
pkey: resume key generation after interrupt
tool/ruby-openssl-docker: update to latest versions
test/test_ssl: fix test failure with TLS 1.3
test/test_x509name: change script encoding to ASCII-8BIT
x509name: refactor OpenSSL::X509::Name#to_s
x509name: fix handling of X509_NAME_{oneline,print_ex}() return value
ahadc (1):
Update CONTRIBUTING.md
nobu (6):
no ID cache in Init functions
search winsock libraries explicitly
openssl: search winsock
openssl_missing.h: constified
reduce LibreSSL warnings
openssl/buffering.rb: no RS when output
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64233 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* The warnings are shown by Thread.report_on_exception defaulting to
true. [Feature #14143] [ruby-core:83979]
* Improves tests by narrowing down the scope where an exception
is expected.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61188 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Merge a commit from upstream:
01445af367ec test/test_ssl: prevent changing default internal encoding
OpenSSL::TestSSL#test_fallback_scsv could change the default internal
encoding accidentally, causing other unrelated test cases to fail.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60911 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Import Ruby/OpenSSL 2.1.0.beta2. The full commit log since commit
e72d960db262 which was imported by r60013 can be found at:
e72d960db2...v2.1.0.beta2
----------------------------------------------------------------
Kazuki Yamaguchi (26):
bn: use ALLOCV() macro instead of xmalloc()
appveyor.yml: remove 'openssl version' line
test/test_ssl_session: skip tests for session_remove_cb
x509ext: implement X509::Extension#==
x509attr: implement X509::Attribute#==
x509cert: implement X509::Certificate#==
x509revoked: add missing X509::Revoked#to_der
x509crl, x509revoked: implement X509::{CRL,Revoked}#==
x509req: implement X509::Request#==
ssl: extract rb_intern("call")
cipher: disallow setting AAD for non-AEAD ciphers
test/test_cipher: fix test_non_aead_cipher_set_auth_data failure
ssl: fix conflict of options in SSLContext#set_params
buffering: let #write accept multiple arguments
pkey: make pkey_check_public_key() non-static
x509cert, x509crl, x509req, ns_spki: check sanity of public key
test/envutil: port assert_warning from Ruby trunk
test/utils: remove a pointless .public_key call in issue_cert
ssl: add SSLContext#add_certificate
test/test_ssl: fix test_security_level
Drop support for LibreSSL 2.4
kdf: add HKDF support
test/test_x509cert: fix flaky test
test/test_x509crl: fix random failure
History.md: fix a typo
Ruby/OpenSSL 2.1.0.beta2
Mark Wright (1):
Fix build failure against OpenSSL 1.1 built with no-deprecated Thanks rhenium for the code review and fixes.
Peter Karman (1):
Add RSA sign_pss() and verify_pss() methods
aeris (1):
TLS Fallback Signaling Cipher Suite Value
kazu (1):
Use caller with length to reduce unused strings
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60907 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
The test case added by r60310 ("fix OpenSSL::SSL::SSLContext#min_version
doesn't work", 2017-10-21) does not pass with OpenSSL >= 1.1.0 or
LibreSSL >= 2.6.0. Check that the default 'min_version' value is
properly enforced by actually attempting a handshake rather than by
inspecting the SSL option flags. [ruby-core:83479] [Bug #14039]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60636 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Sync with master branch of ruby/openssl.git to import changes in
v2.1.0.beta1..v2.0.6. The commit log since v2.1.0.beta1 which was
imported by r59734 can be found at:
https://github.com/ruby/openssl/compare/v2.1.0.beta1...e72d960db262
----------------------------------------------------------------
Kazuki Yamaguchi (16):
test/test_pair: fix test_write_nonblock{,_no_exceptions}
x509name: fix a typo in docs
test/test_fips: skip if setting FIPS mode fails
test/test_asn1: fix possible failure in test_utctime
test/test_ssl: suppress warning in test_alpn_protocol_selection_cancel
test/test_pair: disable compression
test/test_ssl: skip tmp_ecdh_callback test for LibreSSL >= 2.6.1
test/test_ssl: do not run NPN tests for LibreSSL >= 2.6.1
tool/ruby-openssl-docker: update
test/test_pair: replace sleep with IO.select
ssl: prevent SSLSocket#sysread* from leaking uninitialized data
ossl.c: use struct CRYPTO_dynlock_value for non-dynamic locks
ossl.c: make legacy locking callbacks reentrant
test/test_engine: suppress stderr
test/test_engine: check if RC4 is supported
Ruby/OpenSSL 2.0.6
SHIBATA Hiroshi (1):
To use upstream url of github
nobu (1):
ruby.h: unnormalized Fixnum value
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60013 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This is a combined patch of the following two commits in maint:
a09d8c78dd30 test/test_ssl: suppress warning in test_alpn_protocol_selection_cancel
de965374ee85 test/test_pair: disable compression
This hopefully fixes the RubyCI gentoo failure:
20170912T033004Z.fail.html.gz
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59857 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Import Ruby/OpenSSL 2.1.0.beta1. The full commit log since v2.0.5
(imported by r59567) can be found at:
https://github.com/ruby/openssl/compare/v2.0.5...v2.1.0.beta1
----------------------------------------------------------------
Antonio Terceiro (1):
test/test_ssl: explicitly accept TLS 1.1 in corresponding test
Colby Swandale (1):
document using secure protocol to fetch git master in Bundler
Colton Jenkins (1):
Add fips_mode_get to return fips_mode
Kazuki Yamaguchi (85):
Start preparing for 2.1.0
Remove support for OpenSSL 0.9.8 and 1.0.0
bn: refine tests
bn: implement unary {plus,minus} operators for OpenSSL::BN
bn: implement OpenSSL::BN#negative?
Don't define main() when built with --enable-debug
test: let OpenSSL::TestCase include OpenSSL::TestUtils
test: prepare test PKey instances on demand
Add OpenSSL.print_mem_leaks
Enable OSSL_MDEBUG on CI builds
ssl: move default DH parameters from OpenSSL::PKey::DH
Make exceptions with the same format regardless of OpenSSL.debug
ssl: show reason of 'certificate verify error' in exception message
ssl: remove OpenSSL::ExtConfig::TLS_DH_anon_WITH_AES_256_GCM_SHA384
ssl: do not confuse different ex_data index registries
ssl: assume SSL/SSL_CTX always have a valid reference to the Ruby object
Fix RDoc markup
ssl: suppress compiler warning
ext/openssl/deprecation.rb: remove broken-apple-openssl
extconf.rb: print informative message if OpenSSL can't be found
Rakefile: compile the extension before test
kdf: introduce OpenSSL::KDF module
ossl.h: add NUM2UINT64T() macro
kdf: add scrypt
Expand rb_define_copy_func() macro
Expand FPTR_TO_FD() macro
Remove SafeGet*() macros
cipher: rename GetCipherPtr() to ossl_evp_get_cipherbyname()
digest: rename GetDigestPtr() to ossl_evp_get_digestbyname()
Add ossl_str_new(), an exception-safe rb_str_new()
bio: simplify ossl_membio2str() using ossl_str_new()
Remove unused functions and macros
Drop support for LibreSSL 2.3
ocsp: add OpenSSL::OCSP::Request#signed?
asn1: infinite length -> indefinite length
asn1: rearrange tests
ssl: remove a needless NULL check in SSL::SSLContext#ciphers
ssl: return nil in SSL::SSLSocket#cipher if session is not started
asn1: remove an unnecessary function prototype
asn1: require tag information when instantiating generic type
asn1: initialize 'unused_bits' attribute of BitString with 0
asn1: check for illegal 'unused_bits' value of BitString
asn1: disallow NULL to be passed to asn1time_to_time()
asn1: avoid truncating OID in OpenSSL::ASN1::ObjectId#oid
asn1: allow constructed encoding with definite length form
asn1: prohibit indefinite length form for primitive encoding
asn1: allow tag number to be >= 32 for universal tag class
asn1: use ossl_asn1_tag()
asn1: clean up OpenSSL::ASN1::Constructive#to_der
asn1: harmonize OpenSSL::ASN1::*#to_der
asn1: prevent EOC octets from being in the middle of the content
asn1: do not treat EOC octets as part of content octets
x509name: add 'loc' and 'set' kwargs to OpenSSL::X509::Name#add_entry
ssl: do not call session_remove_cb during GC
Backport "Merge branch 'topic/test-memory-leak'" to maint
cipher: update the documentation for Cipher#auth_tag=
Rakefile: let sync:to_ruby know about test/openssl/fixtures
test: fix formatting
test/utils: remove OpenSSL::TestUtils.silent
test/utils: add SSLTestCase#tls12_supported?
test/utils: have start_server yield only the port number
test/utils: do not set ecdh_curves in start_server
test/utils: let server_loop close socket
test/utils: improve error handling in start_server
test/utils: add OpenSSL::TestUtils.openssl? and .libressl?
test/utils: do not use DSA certificates in SSL tests
test/test_ssl: remove test_invalid_shutdown_by_gc
test/test_ssl: move test_multibyte_read_write to test_pair
test/test_ssl_session: rearrange tests
test/test_pair, test/test_ssl: fix for TLS 1.3
ssl: remove useless call to rb_thread_wait_fd()
ssl: fix NPN support
ssl: mark OpenSSL::SSL::SSLContext::DEFAULT_{1024,2048} as private
ssl: use 2048-bit group in the default tmp_dh_cb
ssl: ensure that SSL option flags are non-negative
ssl: update OpenSSL::SSL::OP_* flags
ssl: prefer TLS_method() over SSLv23_method()
ssl: add SSLContext#min_version= and #max_version=
ssl: rework SSLContext#ssl_version=
test/test_x509name: change script encoding to ASCII-8BIT
x509name: refactor OpenSSL::X509::Name#to_s
x509name: add OpenSSL::X509::Name#to_utf8
x509name: add OpenSSL::X509::Name#inspect
x509name: update regexp in OpenSSL::X509::Name.parse
Ruby/OpenSSL 2.1.0.beta1
Marcus Stollsteimer (1):
Fix rdoc for core Integer class
nobu (4):
[DOC] {read,write}_nonblock with exception: false
[DOC] keyword argument _exception_
[DOC] mark up literals
Revert r57690 except for read_nonblock
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59734 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Import Ruby/OpenSSL 2.0.5. The full commit history since v2.0.4
(imported at r59081) can be found at:
https://github.com/ruby/openssl/compare/v2.0.4...v2.0.5
This will fix the test failure on latest Debian sid and the "no
OPENSSL_Applink" issue on mswin.
----------------------------------------------------------------
Kazuki Yamaguchi (11):
test/test_ssl: allow 3DES cipher suites in test_sslctx_set_params
bio: prevent possible GC issue in ossl_obj2bio()
bio: do not use the FILE BIO method in ossl_obj2bio()
Rakefile: install_dependencies: install only when needed
appveyor.yml: test against Ruby 2.4
ossl_pem_passwd_cb: relax passphrase length constraint
ossl_pem_passwd_cb: do not check for taintedness
ossl_pem_passwd_cb: handle nil from the block explicitly
ssl: remove unsupported TLS versions from SSLContext::METHODS
ssl: fix compile error with OpenSSL 1.0.0
Ruby/OpenSSL 2.0.5
Lars Kanis (1):
Add msys2 library dependency tag in gem metadata
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59567 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Import Ruby/OpenSSL 2.0.4. Only bug (and typo) fixes. The full commit
history since v2.0.3 (imported at r57482) can be found at:
https://github.com/ruby/openssl/compare/v2.0.3...v2.0.4
This contains the fix for [Bug #11033].
----------------------------------------------------------------
Jun Aruga (1):
Update .travis.yml and Dockerfile
Kazuki Yamaguchi (9):
test/test_pkey_ec: do not use dummy 0 order
test/test_ssl: fix typo in test_sysread_and_syswrite
ssl: check return value of SSL_set_fd()
Fix typos
test/test_x509store: skip OpenSSL::TestX509Store#test_set_errors
tool/sync-with-trunk: 'LASY' -> 'LAST'
x509store: clear error queue after calling X509_LOOKUP_load_file()
extconf.rb: simplify searching libraries logic
Ruby/OpenSSL 2.0.4
SHIBATA Hiroshi (1):
Fix typos
Vladimir Rybas (1):
Fix documentation for OpenSSL::Cipher#final
nobu (2):
openssl: fix broken openssl check
openssl: fix broken openssl check
usa (1):
Search SSL libraries by testing various filename patterns
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59081 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Import Ruby/OpenSSL 2.0.0. The full commit history since 2.0.0 beta.2
(imported at r56098) can be found at:
https://github.com/ruby/openssl/compare/v2.0.0.beta.2...v2.0.0
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@56946 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/openssl/test_ssl.rb (test_ctx_options): Fix test failure on
Ubuntu 16.04. The fix in r56147 was incomplete. This is a cherry-pick
of the commit b039f3e268c2 at ruby/openssl.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@56178 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/openssl/test_ssl.rb (test_ctx_options): Add a workaround for
patched OpenSSL to fix the Ruby CI failure on Ubuntu 16.04.
20160913T033003Z.fail.html.gz
This commit is a cherry-pick of the following commit at ruby/openssl:
f9c04779a8
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@56147 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* {ext,test}/openssl: Import Ruby/OpenSSL 2.0.0.beta.2. The full commit
history since v2.0.0.beta.1 can be found at:
https://github.com/ruby/openssl/compare/v2.0.0.beta.1...v2.0.0.beta.2
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@56098 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* NEWS, {ext,test,sample}/openssl: Import Ruby/OpenSSL 2.0.0.beta.1.
ext/openssl is now converted into a default gem. The full commit
history since r55538 can be found at:
08e1881f56...v2.0.0.beta.1
[Feature #9612]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@56027 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This fixes `make test-all TESTS=openssl` with OpenSSL master.
* test/openssl/test_x509name.rb: Don't register OID for 'emailAddress'
and 'serialNumber'. A recent change in OpenSSL made OBJ_create()
reject an already existing OID. They were needed to run tests with
OpenSSL 0.9.6 which is now unsupported.
https://git.openssl.org/gitweb/?p=openssl.git;a=commit;h=52832e470f5fe8c222249ae5b539aeb3c74cdb25
[ruby-core:75225] [Feature #12324]
* test/openssl/test_ssl_session.rb (test_server_session): Duplicate
SSL::Session before re-adding to the session store. OpenSSL 1.1.0
starts rejecting SSL_SESSION once removed by SSL_CTX_remove_session().
https://git.openssl.org/gitweb/?p=openssl.git;a=commit;h=7c2d4fee2547650102cd16d23f8125b76112ae75
* test/openssl/test_pkey_ec.rb (setup): Remove X25519 from @keys. X25519
is new in OpenSSL 1.1.0 but this is for key agreement and not for
signing.
* test/openssl/test_pair.rb, test/openssl/test_ssl.rb,
test/openssl/utils.rb: Set security level to 0 when using aNULL cipher
suites.
* test/openssl/utils.rb: Use 1024 bits DSA key for client certificates.
* test/openssl/test_engine.rb: Run each test in separate process.
We can no longer cleanup engines explicitly as ENGINE_cleanup() was
removed.
https://git.openssl.org/gitweb/?p=openssl.git;a=commit;h=6d4fb1d59e61aacefa25edc4fe5acfe1ac93f743
* ext/openssl/ossl_engine.c (ossl_engine_s_cleanup): Add a note to the
RDoc for Engine.cleanup.
* ext/openssl/lib/openssl/digest.rb: Don't define constants for DSS,
DSS1 and SHA(-0) when using with OpenSSL 1.1.0. They are removed.
* test/openssl/test_digest.rb, test/openssl/test_pkey_dsa.rb,
test/openssl/test_pkey_dsa.rb, test/openssl/test_ssl.rb,
test/openssl/test_x509cert.rb, test/openssl/test_x509req.rb: Don't
test unsupported hash functions.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55314 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* ext/openssl/extconf.rb: Check for SSL_CTX_get_security_level().
OpenSSL 1.1.0 introduced "security level".
[ruby-core:75225] [Feature #12324]
* ext/openssl/ossl_ssl.c (ossl_sslctx_{get,set}_security_level): Add
SSLContext#security_level and #security_level=.
* test/openssl/test_ssl.rb (test_security_level): Add test. ...but this
doesn't actually test it. Because #security_level= is necessary in
order to run other tests on OpenSSL 1.1.0, go without tests for now.
Will fix after converting SSLContext#key= and #cert= to normal methods.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55309 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* ext/openssl/ossl_ssl.c (ossl_ssl_stop): Don't free the SSL struct
here. Since some methods such as SSLSocket#connect releases GVL,
there is a chance of use after free if we free the SSL from another
thread. SSLSocket#stop was documented as "prepares it for another
connection" so this is a slightly incompatible change. However when
this sentence was added (r30090, Add toplevel documentation for
OpenSSL, 2010-12-06), it didn't actually. The current behavior is
from r40304 (Correct shutdown behavior w.r.t GC., 2013-04-15).
[ruby-core:74978] [Bug #12292]
* ext/openssl/lib/openssl/ssl.rb (sysclose): Update doc.
* test/openssl/test_ssl.rb: Test this.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55100 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/openssl/test_ssl.rb (test_get_ephemeral_key): should use
assert_instance_of instead of comparison of classes.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54487 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* ext/openssl/ossl_ssl.c (ossl_ssl_tmp_key): Access to ephemeral
TLS session key in case of forward secrecy cipher. Only
available since OpenSSL 1.0.2. [Fix GH-1318]
* ext/openssl/extconf.rb: Check for SSL_get_server_tmp_key.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54485 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* ext/openssl/extconf.rb: check SSL_CTX_set_next_proto_select_cb
function rather than OPENSSL_NPN_NEGOTIATED macro. it exists
even if it is disabled by OpenSSL configuration.
[ruby-core:74384] [Bug #12182]
* ext/openssl/ossl_ssl.c: update #ifdef(s) as above.
* test/openssl/test_ssl.rb: skip NPN tests if NPN is disabled.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54258 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
When you change this to true, you may need to add more tests.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@53141 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
I was worried r52750 would break IO.copy_stream with things like
OpenSSL sockets which wrap IOs, but require data to be run through
through encryption/decryption filters. Apparently my worry
was unfounded, but perhaps this test will ensure this case continues
to work.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52751 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
